In Stock Hot Product
VAL-SEC-T2-3S-350VF-FM
VAL-SEC-T2-3S-350VF-FM 2909590 PHOENIX CONTACT Type 2 surge arrester
$0.00USD
4101 in stock
Key Specifications
(General):63 A (gG / TWIN ferrule 2x 10mm²)
ETIM 5.0 (eCl@ss):EC000941
ETIM 6.0 (eCl@ss):EC000941
(Connection data):EN 61643-11 2012
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| (General) | 63 A (gG / TWIN ferrule 2x 10mm²) |
| ETIM 5.0 (eCl@ss) | EC000941 |
| ETIM 6.0 (eCl@ss) | EC000941 |
| (Connection data) | EN 61643-11 2012 |
| UNSPSC 13.2 (ETIM) | 39121620 |
| (Ambient conditions) | PBT-FR |
| (Protective circuit) | 1 A DC (30 V DC) |
| GTIN (Your advantages) | 4055626371597 |
| Note (Your advantages) | Made to Order (non-returnable) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| Color (Ambient conditions) | light grey RAL 7035 |
| Orderkey (Your advantages) | 2909590 |
| Response time tA (General) | ≤ 100 ns |
| EN type (Ambient conditions) | T2 |
| Nominal voltage UN (General) | 240/415 V AC (TN-S) |
| Altitude (Key Commercial Data) | ≤ 2000 m (amsl (above mean sea level)) |
| Catalog page (Your advantages) | Page 46 (C-4-2017) |
| Nominal frequency fN (General) | 50 Hz (60 Hz) |
| Packing unit (Your advantages) | 1 pc |
| Residual current IPE (General) | ≤ 1 µA |
| Rated load current IL (General) | 40 A (Biconnect M4 fork-type cable lug 6 mm²) |
| Screw thread (Protective circuit) | M2 |
| TOV behavior at UT(L-N) (General) | 457 V AC (5 s / withstand mode) |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| TOV behavior at UT(N-PE) (General) | 1200 V AC (200 ms / withstand mode) |
| Country of origin (Your advantages) | DE (Germany) |
| Residual voltage Ures(L-N) (General) | ≤ 1.35 kV (at In) |
| Housing material (Ambient conditions) | PA 6.6-FR 20% GF |
| Residual voltage Ures(L-PE) (General) | ≤ 1.75 kV (at In) |
| Residual voltage Ures(N-PE) (General) | ≤ 0.5 kV (at In) |
| Stripping length (Protective circuit) | 7 mm |
| Connection method (Protective circuit) | Plug-in/screw connection via COMBICON |
| Custom tariff number (Your advantages) | 85363030 |
| Operating current (Protective circuit) | 5 mA AC ... 1 A AC |
| Operating voltage (Protective circuit) | 5 V AC ... 250 V AC |
| Tightening torque (Protective circuit) | 0.25 Nm |
| eCl@ss 5.1 (Standards and Regulations) | 27130801 |
| eCl@ss 6.0 (Standards and Regulations) | 27130805 |
| eCl@ss 8.0 (Standards and Regulations) | 27130805 |
| eCl@ss 9.0 (Standards and Regulations) | 27130805 |
| Mode of protection (Ambient conditions) | L-N |
| Standards/regulations (Connection data) | IEC 61643-11 2011 |
| Switching function (Protective circuit) | PDT contact |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 4 |
| Screw thread (Indicator/remote signaling) | M5 |
| Degree of protection (Key Commercial Data) | IP20 |
| Voltage protection level Up(L-N) (General) | ≤ 1.5 kV |
| Voltage protection level Up(L-PE) (General) | ≤ 2.3 kV |
| Voltage protection level Up(N-PE) (General) | ≤ 1.5 kV |
| IEC power supply system (Ambient conditions) | TN-S |
| IEC test classification (Ambient conditions) | II |
| Short-circuit current rating ISCCR (General) | 50 kA |
| Max. backup fuse with branch wiring (General) | 200 A (gG) |
| Maximum continuous voltage UC(N-PE) (General) | 264 V AC |
| Stripping length (Indicator/remote signaling) | 16 mm |
| Connection method (Indicator/remote signaling) | Fork-type cable lug |
| Tightening torque (Indicator/remote signaling) | 4.5 Nm |
| Conductor cross section AWG (Protective circuit) | 28 ... 16 |
| Conductor cross section solid (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Follow current interrupt rating Ifi(N-PE) (General) | 100 A (264 V AC) |
| Surge protection fault message (Ambient conditions) | Optical, remote indicator contact |
| Ambient temperature (operation) (Key Commercial Data) | -40 °C ... 80 °C |
| Conductor cross section flexible (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Max. backup fuse with V-type through wiring (General) | 40 A (gG / Biconnect M4 fork-type cable lug, 6 mm²) |
| Maximum continuous operating voltage UC(L-N) (General) | 350 V AC |
| Nominal discharge current In(8/20) µs (L-N) (General) | 10 kA |
| Permissible humidity (operation) (Key Commercial Data) | 5 % ... 95 % |
| Weight per Piece (excluding packing) (Your advantages) | 385.000 g |
| Maximum continuous operating voltage UC(L-PE) (General) | 350 V AC |
| Nominal discharge current In(8/20) µs (L-PE) (General) | 10 kA |
| Nominal discharge current In(8/20) µs (N-PE) (General) | 20 kA |
| Conductor cross section AWG (Indicator/remote signaling) | 12 ... 4 |
| Maximum discharge current Imax(8/20) µs (L-N) (General) | 20 kA |
| Maximum discharge current Imax(8/20) µs (L-PE) (General) | 20 kA |
| Maximum discharge current Imax(8/20) µs (N-PE) (General) | 40 kA |
| Conductor cross section solid (Indicator/remote signaling) | 2.5 mm² ... 25 mm² |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Ambient temperature (storage/transport) (Key Commercial Data) | -40 °C ... 80 °C |
| Conductor cross section flexible (Indicator/remote signaling) | 1.5 mm² ... 6 mm² |
Product Description
Plug-in surge protection device with leakage current proof, according to type 2/class II, for three-phase power supply networks with N and PE separated (5-conductor system: L1, L2, L3, N, PE), with re
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
Pluggable surge protective device free of leakage current, in accordance with Type 2/Class II, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with remote indication contact.
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
