Service time: Monday to Friday 9:00-18:00
VAL-SEC-T2-2C-350 - VAL-SEC-T2-2C-350 2905342 VAL‐CP‐2C‐350/O 2881052 PHOENIX CONTACT Type 2 surge arrester
In Stock Hot Product

VAL-SEC-T2-2C-350

VAL-SEC-T2-2C-350 2905342 VAL‐CP‐2C‐350/O 2881052 PHOENIX CONTACT Type 2 surge arrester

$0.00USD
4104 in stock
Key Specifications
GTIN:4046356948265
Orderkey:2905342
(General):63 A (gG / TWIN ferrule 2x 10mm²)
Catalog page:Page 47 (C-4-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support

Technical Specifications

ParameterValue
GTIN4046356948265
Orderkey2905342
(General)63 A (gG / TWIN ferrule 2x 10mm²)
Catalog pagePage 47 (C-4-2017)
Packing unit1 pc
Country of originDE (Germany)
(Connection data)L-N
(UL specifications)14 ... 4 (flexible)
Custom tariff number85363030
(Ambient conditions)PBT-FR
(UL connection data)EN 61643-11 2012
Altitude (Dimensions)≤ 2000 m (amsl (above mean sea level))
Type (Ambient conditions)DIN rail module, two-section, divisible
Color (Ambient conditions)light grey RAL 7035
Response time tA (General)≤ 25 ns
SPD Type (Connection data)4CA
Depth (Key Commercial Data)74.5 mm (incl. DIN rail 7.5 mm)
Width (Key Commercial Data)25.4 mm
EN type (Ambient conditions)T2
Height (Key Commercial Data)89.9 mm
Nominal voltage UN (General)240/415 V AC (TN-C)
TOV behavior at UT (General)415 V AC (5 s / withstand mode)
Nom. voltage (Connection data)277/480 V AC
Nominal frequency fN (General)50 Hz (60 Hz)
Shock (operation) (Dimensions)30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Rated load current IL (General)40 A (Biconnect M4 fork-type cable lug 6​ mm²)
Residual voltage Ures (General)≤ 1.5 kV (at In)
Degree of protection (Dimensions)IP20
Screw thread (Protective circuit)M5
Mounting type (Ambient conditions)DIN rail: 35 mm
Vibration (operation) (Dimensions)5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
Nominal frequency (Connection data)50/60 Hz
Mode of protection (Connection data)L-L
Weight per Piece (excluding packing)225.000 g
Housing material (Ambient conditions)PA 6.6-FR 20% GF
Stripping length (Protective circuit)16 mm
Tightening torque (UL specifications)40 lbf-in. ... 50 lbf-in.
Voltage protection level Up (General)≤ 1.5 kV
Connection method (Protective circuit)Fork-type cable lug
Horizontal pitch (Key Commercial Data)1.4 Div.
Tightening torque (Protective circuit)4.5 Nm
Maximum continuous voltage UC (General)350 V AC
Mode of protection (Ambient conditions)L-PEN
Degree of pollution (Ambient conditions)2
Number of positions (Ambient conditions)2
Standards/regulations (UL connection data)IEC 61643-11 2011
Power distribution system (Connection data)Wye
Ambient temperature (operation) (Dimensions)-40 °C ... 80 °C
IEC power supply system (Ambient conditions)TN-C
IEC test classification (Ambient conditions)II
Short-circuit current rating ISCCR (General)25 kA (in case of 315 A gG backup fuse)
Max. backup fuse with branch wiring (General)315 A (gG)
Permissible humidity (operation) (Dimensions)5 % ... 95 %
Conductor cross section AWG (UL specifications)14 ... 2 (solid)
Conductor cross section AWG (Protective circuit)12 ... 4
Nominal discharge current In(8/20) µs (General)20 kA
Conductor cross section solid (Protective circuit)2.5 mm² ... 25 mm²
Maximum discharge current Imax(8/20) µs (General)40 kA
Nominal discharge current In(L-L) (Connection data)20 kA
Nominal discharge current In(L-N) (Connection data)20 kA
Surge protection fault message (Ambient conditions)optical
Ambient temperature (storage/transport) (Dimensions)-40 °C ... 80 °C
Conductor cross section flexible (Protective circuit)1.5 mm² ... 6 mm²
Max. backup fuse with V-type through wiring (General)40 A (gG / Biconnect M4 fork-type cable lug, 6​ mm²)
Measured limiting voltage MLV (L-L) (Connection data)3280 V
Measured limiting voltage MLV (L-N) (Connection data)2000 V
Flammability rating according to UL 94 (Ambient conditions)V-0
Maximum continuous operating voltage MCOV (L-L) (Connection data)700 V AC
Maximum continuous operating voltage MCOV (L-N) (Connection data)350 V AC

Product Description

Plug-in surge arrester according to type 2/class II, for two-phase power supply networks with PE and N routing combined in one conductor (3-conductor system: L1, L2, PEN).
Key Features
  • Industrial grade quality
  • RoHS compliant
  • CE certified
  • 1-year warranty

Product Documents

Datasheet

Technical specifications and performance data

User Manual

Installation and operation guide

Top