In Stock Hot Product
VAL-MS-T1/T2 600DC-PV/2+V
VAL-MS-T1/T2 600DC-PV/2+V 2801163 PHOENIX CONTACT Lightning/surge arrester type 1/2
$0.00USD
3643 in stock
Key Specifications
GTIN:4046356714303
Orderkey:2801163
Catalog page:Page 41 (C-4-2017)
Packing unit:1 pc
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356714303 |
| Orderkey | 2801163 |
| Catalog page | Page 41 (C-4-2017) |
| Packing unit | 1 pc |
| Note (General) | The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area. |
| Country of origin | DE (Germany) |
| (Connection data) | (L-) - G |
| Custom tariff number | 85363030 |
| (Ambient conditions) | PBT-FR |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| (Additional descriptions) | ≤ 3.6 kV (at 40 kA) |
| Color (Ambient conditions) | jet black RAL 9005 |
| SPD Type (Connection data) | 1 |
| Depth (Key Commercial Data) | 65.7 mm (incl. DIN rail 7.5 mm) |
| Width (Key Commercial Data) | 53.4 mm |
| EN type (Ambient conditions) | T1 / T2 |
| Height (Key Commercial Data) | 89.8 mm |
| Shock (operation) (Dimensions) | 60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Degree of protection (Dimensions) | IP20 (only when all terminal points are used) |
| Nominal voltage (Connection data) | 800 V DC |
| Accessibility (Ambient conditions) | Accessible |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| Vibration (operation) (Dimensions) | 7.5g (5-500 Hz/2.5 h/XYZ) |
| Mode of protection (Connection data) | (L+) - (L-) |
| Weight per Piece (excluding packing) | 365.400 g |
| Housing material (Ambient conditions) | PA 6.6-FR |
| Tightening torque (UL specifications) | 30 lbf-in. |
| Horizontal pitch (Key Commercial Data) | 3 Div. |
| Mode of protection (Ambient conditions) | (L+) - (L-) |
| Degree of pollution (Ambient conditions) | 2 |
| SPD failure behavior (Ambient conditions) | OCM (Open-circuit mode) |
| (Protective circuit DC voltage side (DC)) | 4.5 Nm (25 mm² ... 35 mm²) |
| Installation location (Ambient conditions) | Inside |
| Response time tA (Additional descriptions) | ≤ 25 ns |
| Standards/regulations (UL connection data) | EN 50539-11 2013 |
| Power distribution system (Connection data) | DC PV |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC test classification (Ambient conditions) | PV I / II |
| Connection configuration (Ambient conditions) | Y configuration |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Nominal discharge current In (Connection data) | 20 kA |
| Residual current IPE (Additional descriptions) | ≤ 20 µA DC |
| Conductor cross section AWG (UL specifications) | 10 ... 2 |
| Rated load current IL (Additional descriptions) | 80 A |
| Residual voltage Ures (Additional descriptions) | ≤ 2.6 kV (at In) |
| Voltage protection rating VPR (Connection data) | 2 kV |
| Surge protection fault message (Ambient conditions) | optical |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Insulation resistance Riso (Additional descriptions) | > 5 GΩ (at 500 V DC) |
| Short-circuit current rating (SCCR) (Connection data) | 50 kA |
| Voltage protection level Up (Additional descriptions) | ≤ 2.6 kV |
| Screw thread (Protective circuit DC voltage side (DC)) | M5 |
| Standby power consumption PC (Additional descriptions) | ≤ 25 mVA |
| Stripping length (Protective circuit DC voltage side (DC)) | 16 mm |
| Connection method (Protective circuit DC voltage side (DC)) | Fork-type cable lug |
| Continuous operating current ICPV (Additional descriptions) | < 20 µA |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Maximum continuous operating voltage MCOV (Connection data) | 800 V DC |
| Tightening torque (Protective circuit DC voltage side (DC)) | 3 Nm (1,5 mm² ... 16 mm²) |
| Short-circuit current rating ISCPV (Additional descriptions) | 2000 A |
| Distance between live and grounded parts (Ambient conditions) | 8 mm |
| Nominal discharge current (8/20) µs (Additional descriptions) | 15 kA |
| Maximum discharge current Imax(8/20) µs (Additional descriptions) | 40 kA |
| Total discharge current Itotal(8/20) µs (Additional descriptions) | 40 kA |
| Installation location of the disconnect device (Ambient conditions) | Internal |
| Maximum continuous operating voltage UCPV (Additional descriptions) | 720 V DC |
| Total discharge current Itotal(10/350) µs (Additional descriptions) | 7 kA |
| Conductor cross section AWG (Protective circuit DC voltage side (DC)) | 15 ... 2 |
| Conductor cross section solid (Protective circuit DC voltage side (DC)) | 1.5 mm² ... 35 mm² |
| Impulse discharge current (10/350) µs, charge (Additional descriptions) | 2.5 As |
| Conductor cross section flexible (Protective circuit DC voltage side (DC)) | 1.5 mm² ... 16 mm² |
| Impulse discharge current (10/350) µs, peak value limp (Additional descriptions) | 5 kA |
| Impulse discharge current (10/350) µs, specific energy (Additional descriptions) | 6.25 kJ/Ω |
Product Description
Lightning surge / current protection device for isolated and grounded 2-pole photovoltaic 600V DC DC systems, for rail mounting, 3-pole base element, three plug-in protection elements with temperature
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
