In Stock Hot Product
VAL-MS-T1/T2 48/12.5/O-FM
VAL-MS-T1/T2 48/12.5/O-FM 2906282 PHOENIX CONTACT Lightning/surge arrester type 1/2
$0.00USD
3574 in stock
Key Specifications
GTIN:4055626063072
Note:Made to Order (non-returnable)
Orderkey:2906282
(General):160 A AC (gG)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4055626063072 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2906282 |
| (General) | 160 A AC (gG) |
| Catalog page | Page 39 (C-4-2017) |
| Packing unit | 12 pc |
| Country of origin | DE (Germany) |
| (Connection data) | (L-) - G |
| Custom tariff number | 85363090 |
| (Ambient conditions) | (L+) - PE |
| (Protective circuit) | 30 ... 14 (UL) |
| Altitude (Dimensions) | max. 2000 m |
| Minimum order quantity | 12 pc |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| Color (Ambient conditions) | black |
| Response time tA (General) | ≤ 25 ns |
| SPD Type (Connection data) | 1CA |
| Depth (Key Commercial Data) | 89.2 mm |
| Width (Key Commercial Data) | 17.5 mm |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| EN type (Ambient conditions) | T1 / T2 |
| Height (Key Commercial Data) | 77.1 mm |
| Nominal voltage UN (General) | -48 V DC (RRH) |
| TOV behavior at UT (General) | 100 V AC (5 s / withstand mode) |
| (Indicator/remote signaling) | 10 ... 2 (UL) |
| Nominal frequency fN (General) | 50 Hz (60 Hz) |
| Residual current IPE (General) | ≤ 0.6 mA |
| Shock (operation) (Dimensions) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Rated load current IL (General) | 80 A |
| Residual voltage Ures (General) | ≤ 0.4 kV (at In) |
| Response time tA(L-N) (General) | ≤ 25 ns |
| Degree of protection (Dimensions) | IP20 (only when all terminal points are used) |
| Nominal voltage (Connection data) | 60 V DC |
| Response time tA(L-PEN) (General) | ≤ 25 ns |
| Screw thread (Protective circuit) | M2 |
| TOV behavior at UT(L-N) (General) | 100 V AC (5 s / withstand mode) |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| Vibration (operation) (Dimensions) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
| TOV behavior at UT(L-PEN) (General) | 100 V AC (5 s / withstand mode) |
| Mode of protection (Connection data) | L-L |
| Weight per Piece (excluding packing) | 154.030 g |
| Housing material (Ambient conditions) | PBT |
| Stripping length (Protective circuit) | 7 mm |
| Tightening torque (UL specifications) | 30 lbf-in. |
| Voltage protection level Up (General) | ≤ 0.4 kV |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Connection method (Protective circuit) | Screw connection |
| Horizontal pitch (Key Commercial Data) | 1 Div. |
| Operating current (Protective circuit) | 5 mA AC ... 1.5 A |
| Operating voltage (Protective circuit) | 5 V AC ... 250 V AC |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Standby power consumption PC (General) | ≤ 45 mVA |
| Tightening torque (Protective circuit) | 0.25 Nm |
| Maximum continuous voltage UC (General) | 75 V AC |
| Mode of protection (Ambient conditions) | L-PEN |
| Switching function (Protective circuit) | PDT contact |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 1 |
| Screw thread (Indicator/remote signaling) | M5 |
| Standards/regulations (UL connection data) | EN 61643-11/A11 2007 |
| Voltage protection level Up(L-N) (General) | ≤ 0.4 kV |
| Power distribution system (Connection data) | Single phase |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | DC |
| IEC test classification (Ambient conditions) | I / II |
| Short-circuit current rating ISCCR (General) | 25 kA |
| Voltage protection level Up(L-PEN) (General) | ≤ 0.4 kV |
| Max. backup fuse with branch wiring (General) | 160 A AC (gG) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Stripping length (Indicator/remote signaling) | 16 mm |
| Connection method (Indicator/remote signaling) | Screw connection |
| Nominal discharge current In (Connection data) | 20 kA |
| Tightening torque (Indicator/remote signaling) | 3 Nm ... 4.5 Nm (UL) |
| Conductor cross section AWG (UL specifications) | 10 ... 2 |
| Measured limiting voltage MLV (Connection data) | 1240 V |
| Voltage protection rating VPR (Connection data) | 400 V |
| Conductor cross section AWG (Protective circuit) | 28 ... 16 |
| Nominal discharge current In(8/20) µs (General) | 12.5 kA |
| Conductor cross section solid (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Maximum discharge current Imax(8/20) µs (General) | 30 kA |
| Nominal discharge current In(L-G) (Connection data) | 20 kA |
| Surge protection fault message (Ambient conditions) | Optical, remote indicator contact |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Conductor cross section flexible (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Max. backup fuse with V-type through wiring (General) | 80 A AC (gG - 16 mm²) |
| Measured limiting voltage MLV (L-G) (Connection data) | 1240 V |
| Voltage protection rating VPR (L-N) (Connection data) | 400 V |
| Maximum continuous operating voltage UC(L-N) (General) | 75 V AC |
| Nominal discharge current In(8/20) µs (L-N) (General) | 12.5 kA |
| Conductor cross section AWG (Indicator/remote signaling) | 15 ... 2 |
| Impulse discharge current (10/350) µs, charge (General) | 6.25 As |
| Maximum continuous operating voltage UC(L-PEN) (General) | 75 V AC |
| Maximum discharge current Imax(8/20) µs (L-N) (General) | 30 kA |
| Nominal discharge current In(8/20) µs (L-PEN) (General) | 12.5 kA |
| Nominal discharge current In(L+) - (L-) (Connection data) | 20 kA |
| Conductor cross section solid (Indicator/remote signaling) | 1.5 mm² ... 35 mm² |
| Maximum discharge current Imax(8/20) µs (L-PEN) (General) | 30 kA |
| Flammability rating according to UL 94 (Ambient conditions) | V0 |
| Maximum continuous operating voltage MCOV (Connection data) | 75 V AC |
| Measured limiting voltage MLV (L+) - (L-) (Connection data) | 1230 V |
| Conductor cross section flexible (Indicator/remote signaling) | 1.5 mm² ... 25 mm² |
| Impulse discharge current (10/350) µs (L-N), charge (General) | 6.25 As |
| Impulse discharge current (10/350) µs, peak value limp (General) | 12.5 kA |
| Impulse discharge current (10/350) µs, specific energy (General) | 39 kJ/Ω |
| Maximum continuous operating voltage MCOV (L-G) (Connection data) | 75 V AC |
| Maximum continuous operating voltage MCOV (L-N) (Connection data) | 75 V AC |
| Impulse discharge current (10/350) µs (L-N), specific energy (General) | 39 kJ/Ω |
| Maximum continuous operating voltage MCOV (L+) - (L-) (Connection data) | 100 V DC |
| Maximum continuous operating voltage MCOV (L+/L-) - G (Connection data) | 100 V DC |
| Impulse discharge current (10/350) µs (L-N), peak current value Iimp (General) | 12.5 kA |
Product Description
Universal pluggable lightning current / surge arrester equipped with varistors for single-phase power supply networks with common N and PE (2-conductor system: L1, PEN), with remote indication contact
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
