In Stock Hot Product
VAL-CP-MCB-1S-350/40/FM
VAL-CP-MCB-1S-350/40/FM 2882763 PHOENIX CONTACT Type 2 surge arrester
$0.00USD
3686 in stock
Key Specifications
GTIN:4046356175821
Orderkey:2882763
(General):457 V AC (120 min / safe failure mode)
Catalog page:Page 66 (C-4-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356175821 |
| Orderkey | 2882763 |
| (General) | 457 V AC (120 min / safe failure mode) |
| Catalog page | Page 66 (C-4-2017) |
| Packing unit | 1 pc |
| Country of origin | HU (Hungary) |
| (Connection data) | IEC 60364-5-534 |
| Custom tariff number | 85363010 |
| (Ambient conditions) | N-PE |
| (Protective circuit) | 1 mA DC ... 50 mA DC |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| Color (Ambient conditions) | light grey RAL 7035 |
| Depth (Key Commercial Data) | 76 mm |
| Width (Key Commercial Data) | 72 mm |
| EN type (Ambient conditions) | T2 |
| Height (Key Commercial Data) | 101 mm |
| Nominal voltage UN (General) | 240 V AC (TN-S) |
| Nominal frequency fN (General) | 50 Hz (60 Hz) |
| Residual current IPE (General) | ≤ 1 µA |
| Response time tA(L-N) (General) | ≤ 25 ns |
| Response time tA(L-PE) (General) | ≤ 100 ns |
| Response time tA(N-PE) (General) | ≤ 100 ns |
| Degree of protection (Dimensions) | IP20 |
| Screw thread (Protective circuit) | M2 |
| TOV behavior at UT(L-N) (General) | 415 V AC (5 s / withstand mode) |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| TOV behavior at UT(N-PE) (General) | 1200 V AC (200 ms / withstand mode) |
| Residual voltage Ures(L-N) (General) | ≤ 2.3 kV (at In) |
| Weight per Piece (excluding packing) | 501.500 g |
| Housing material (Ambient conditions) | PBT-FR |
| Residual voltage Ures(L-PE) (General) | ≤ 2.5 kV (at In) |
| Residual voltage Ures(N-PE) (General) | ≤ 1.2 kV (at 10 kA) |
| Stripping length (Protective circuit) | 7 mm |
| Connection method (Protective circuit) | Pluggable screw connection |
| Horizontal pitch (Key Commercial Data) | 4 Div. |
| Operating current (Protective circuit) | 1 mA AC ... 2 A AC |
| Operating voltage (Protective circuit) | 250 V AC |
| Tightening torque (Protective circuit) | 0.25 Nm |
| Mode of protection (Ambient conditions) | L-N |
| Standards/regulations (Connection data) | IEC 61643-11 2011 |
| Switching function (Protective circuit) | PDT contact |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 2 |
| Screw thread (Indicator/remote signaling) | M5 |
| Voltage protection level Up(L-N) (General) | ≤ 2.5 kV |
| Voltage protection level Up(N-PE) (General) | ≤ 1.7 kV |
| Ambient temperature (operation) (Dimensions) | -25 °C ... 60 °C |
| Connection name (Indicator/remote signaling) | Protective ground connection |
| IEC power supply system (Ambient conditions) | TN-S |
| IEC test classification (Ambient conditions) | II |
| Short-circuit current rating ISCCR (General) | 25 kA |
| Maximum continuous voltage UC(N-PE) (General) | 264 V AC |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Stripping length (Indicator/remote signaling) | 16 mm |
| Connection method (Indicator/remote signaling) | Screw connection |
| Tightening torque (Indicator/remote signaling) | 4.5 Nm |
| Conductor cross section AWG (Protective circuit) | 28 ... 16 |
| Nominal discharge current In(8/20) µs (General) | 20 kA |
| Conductor cross section solid (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Maximum discharge current Imax(8/20) µs (General) | 30 kA |
| Follow current interrupt rating Ifi(N-PE) (General) | 100 A |
| Surge protection fault message (Ambient conditions) | Optical, remote indicator contact |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Conductor cross section flexible (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Max. backup fuse with V-type through wiring (General) | 40 A (gG) |
| Maximum continuous operating voltage UC(L-N) (General) | 350 V AC |
| Maximum continuous operating voltage UC(L-PE) (General) | 350 V AC |
| Conductor cross section AWG (Indicator/remote signaling) | 12 ... 4 |
| Conductor cross section solid (Indicator/remote signaling) | 2.5 mm² ... 25 mm² |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Conductor cross section flexible (Indicator/remote signaling) | 2.5 mm² ... 16 mm² |
Product Description
Combination of type 2 surge protection and arrester pre-fuse, with unloader and pre-fuse monitoring, in combination with remote indication contact. Execution: 3-conductor system (L1, N, PE), NS 35 loa
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
