In Stock Hot Product
PWT 100-800AC-FM
PWT 100-800AC-FM 2800531 PHOENIX CONTACT Lightning/surge arrester type 1/2
$0.00USD
4737 in stock
Key Specifications
GTIN:4046356570688
Orderkey:2800531
(General):Long-wave surge current 2 ms in accordance with IEC 60099-4: 250 x 1.0 kA; 500 x 0.5 kA.
Catalog page:Page 40 (C-4-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356570688 |
| Orderkey | 2800531 |
| (General) | Long-wave surge current 2 ms in accordance with IEC 60099-4: 250 x 1.0 kA; 500 x 0.5 kA. |
| Catalog page | Page 40 (C-4-2017) |
| Packing unit | 1 pc |
| (Dimensions) | 4g (5 ... 100 Hz / X, Y, Z - according to GL ) |
| Note (General) | Assembling: Two 8 mm screws with 8 Nm on an isolated or grounded surface |
| Country of origin | DE (Germany) |
| (Connection data) | Delta |
| (UL specifications) | 1.5 A DC |
| Custom tariff number | 85363010 |
| (Ambient conditions) | gray |
| (Protective circuit) | 1.5 A DC |
| (UL connection data) | EN 61643-11 2012 |
| Altitude (Dimensions) | ≤ 4000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | Installation module |
| (Additional descriptions) | 800 A (aR (only up to Iimp= 25 kA)) |
| Color (Ambient conditions) | silver gray |
| SPD Type (Connection data) | 4CA |
| Depth (Key Commercial Data) | 280 mm |
| Width (Key Commercial Data) | 176 mm |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| EN type (Ambient conditions) | T1 / T2 |
| Height (Key Commercial Data) | 191 mm |
| Nom. voltage (Connection data) | 690 V AC |
| Shock (operation) (Dimensions) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Degree of protection (Dimensions) | IP20 (only when all terminal points are used) |
| Screw thread (Protective circuit) | M3 |
| Mounting type (Ambient conditions) | Screw mounting |
| Vibration (operation) (Dimensions) | 5g (10 ... 150 Hz / 2.5 h / X, Y, Z) |
| Nominal frequency (Connection data) | 60 Hz |
| Mode of protection (Connection data) | L-L |
| Weight per Piece (excluding packing) | 10,845.000 g |
| Housing material (Ambient conditions) | Die-cast aluminum, salt water resistant |
| Operating current (UL specifications) | 1.5 A AC |
| Operating voltage (UL specifications) | 30 V AC |
| Stripping length (Protective circuit) | 7 mm |
| Tightening torque (UL specifications) | 5 lbf-in. ... 7 lbf-in. |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Horizontal pitch (Key Commercial Data) | 10 Div. |
| Operating current (Protective circuit) | 1.5 A AC |
| Operating voltage (Protective circuit) | 30 V AC |
| Tightening torque (Protective circuit) | 0.55 Nm |
| Mode of protection (Ambient conditions) | L-PE |
| Switching function (Protective circuit) | 2x N/C contacts, 1-pos. |
| Degree of pollution (Ambient conditions) | 3 |
| Number of positions (Ambient conditions) | 3 |
| Rated current (Indicator/remote signaling) | 10 mA AC/DC |
| Standards/regulations (UL connection data) | IEC 61643-11 2011 |
| Power distribution system (Connection data) | Wye |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | TN-C |
| IEC test classification (Ambient conditions) | I / II |
| Nominal voltage UN (Additional descriptions) | 690 V AC |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Nominal frequency fN (Additional descriptions) | 50 Hz (60 Hz) |
| Operating current (Indicator/remote signaling) | 7 mA AC/DC ... 13 mA AC/DC |
| Operating voltage (Indicator/remote signaling) | 19.2 V AC/DC ... 30 V AC/DC |
| Residual current IPE (Additional descriptions) | ≤ 20 µA |
| Conductor cross section AWG (UL specifications) | 24 ... 12 |
| Connection name (UL indicator/remote signaling) | Double terminal point |
| Rated load current IL (Additional descriptions) | 150 A (Serial through wiring with 50 mm²) |
| Conductor cross section AWG (Protective circuit) | 24 ... 12 |
| Response time tA(L-PE) (Additional descriptions) | ≤ 100 ns |
| Tightening torque (UL indicator/remote signaling) | 75 lbf-in. |
| Conductor cross section solid (Protective circuit) | 0.2 mm² ... 2.5 mm² |
| TOV behavior at UT(L-PE) (Additional descriptions) | 1960 V AC (200 ms / withstand mode) |
| Nominal discharge current In(L-G) (Connection data) | 20 kA |
| Nominal discharge current In(L-L) (Connection data) | 20 kA |
| Surge protection fault message (Ambient conditions) | Optical, remote indicator contact |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Conductor cross section flexible (Protective circuit) | 0.2 mm² ... 2.5 mm² |
| Measured limiting voltage MLV (L-G) (Connection data) | 4370 V |
| Measured limiting voltage MLV (L-L) (Connection data) | 8750 V |
| Residual voltage Ures(L-PE) (Additional descriptions) | ≤ 2.7 kV (at In) |
| Standby power consumption PC (Additional descriptions) | ≤ 48 mVA |
| Max. required back-up fuse (Indicator/remote signaling) | 1 A (e.g. T to IEC 127-2/III) |
| Screw thread (Supply status indicator / remote signaling) | M6 |
| Conductor cross section AWG (UL indicator/remote signaling) | 1/0 ... 6 |
| Flammability rating according to UL 94 (Ambient conditions) | V-2 |
| Voltage protection level Up(L-PE) (Additional descriptions) | ≤ 4.5 kV |
| Connection name (Supply status indicator / remote signaling) | PE conductor connection |
| Short-circuit current rating ISCCR (Additional descriptions) | 50 kA |
| Max. backup fuse with branch wiring (Additional descriptions) | 400 A (gG at 2x 50 mm²) |
| Stripping length (Supply status indicator / remote signaling) | 24 mm |
| Connection method (Supply status indicator / remote signaling) | Ring cable lug |
| Tightening torque (Supply status indicator / remote signaling) | 20 Nm |
| Maximum continuous operating voltage MCOV (L-G) (Connection data) | 800 V AC |
| Maximum continuous operating voltage MCOV (L-L) (Connection data) | 800 V AC |
| Follow current interrupt rating Ifi(L-PE) (Additional descriptions) | 50 kA |
| Total discharge current Itotal(10/350) µs (Additional descriptions) | 100 kA |
| Max. backup fuse with V-type through wiring (Additional descriptions) | 125 A (gG at ≥35 mm²) |
| Maximum continuous operating voltage UC(L-PE) (Additional descriptions) | 800 V AC |
| Nominal discharge current In(8/20) µs (L-PE) (Additional descriptions) | 35 kA |
| Conductor cross section AWG (Supply status indicator / remote signaling) | 6 ... 3/0 |
| Maximum discharge current Imax(8/20) µs (L-PE) (Additional descriptions) | 100 kA |
| Conductor cross section solid (Supply status indicator / remote signaling) | 16 mm² ... 95 mm² |
| Conductor cross section flexible (Supply status indicator / remote signaling) | 16 mm² ... 95 mm² |
| Impulse discharge current (10/350) µs (L-PE), charge (Additional descriptions) | 17.5 As |
| Impulse discharge current (10/350) µs (L-PE), specific energy (Additional descriptions) | 305 kJ/Ω |
| Immunity to interference according to IEC 61000-4-5 (core-core) (Indicator/remote signaling) | 1 kV |
| Immunity to interference according to IEC 61000-4-5 (core-ground) (Indicator/remote signaling) | 6 kV |
| Impulse discharge current (10/350) µs (L-PE), peak current value Iimp (Additional descriptions) | 35 kA |
Product Description
Lightning current / surge arrester, according to type 1/2 / Class I/II, for three-phase power grids with combined PE and N laying in one conductor (L1, L2, L3, PEN).
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
