In Stock Hot Product
PTCB E1 24DC/0.2A SI-R
PTCB E1 24DC/0.2A SI-R 1361049 PHOENIX CONTACT Electronic Appliance Protection Switches
$0.00USD
4675 in stock
Key Specifications
:Repeated hard short circuits can reduce the melting integral of the integrated backup fuse.
EMC:A
Fuse:electronic
Note:Connection for signal line tested in accordance with EN 61000-4-4 with 1 kV; if necessary, customer must provide appropriate protective measures
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Repeated hard short circuits can reduce the melting integral of the integrated backup fuse. | |
| EMC | A |
| Fuse | electronic |
| Note | Connection for signal line tested in accordance with EN 61000-4-4 with 1 kV; if necessary, customer must provide appropriate protective measures |
| Type | DIN rail module, one-piece |
| Depth | 55.6 mm (incl. DIN rail 7.5 mm) |
| Width | 6.2 mm |
| Height | 105.8 mm |
| Voltage | < 5 V DC (Low state) |
| Altitude | ≤ 3000 m up to 52 °C (amsl) |
| Humidity | B |
| Material | PBT |
| Enclosure | A |
| Vibration | B |
| Efficiency | > 98.5 % |
| Temperature | A |
| Product type | Device circuit breakers |
| Pulse length | ≥ 50 ms (High) |
| Voltage drop | 0.11 V (at 0.2 A) |
| Humidity test | 96 h, 95 % RH, 40 °C |
| Mounting type | DIN rail: 35 mm |
| Rated voltage | 24 V DC |
| Shutdown time | ≤ 600 ms |
| Identification | UL/C-UL Listed UL 508 |
| Output current | max. 0.015 A (Short-circuit-proof) |
| Output voltage | 24 V DC (Error) |
| Product family | PTCB |
| Channel LED off | off (Channel switched off) |
| Channel LED red | lit (Channel switched off, over- or undervoltage active) |
| No. of channels | 1 |
| Tripping method | E (electronic) |
| Pollution degree | 2 |
| Protection class | III |
| Rated current IN | 15 A DC (Total current input) |
| Stripping length | 8 mm |
| Channel LED green | lit (Channel switched on) |
| Connection method | Push-in connection |
| Cross section AWG | (converted acc. to IEC) |
| Fail-safe element | 4 A DC |
| Operating voltage | 10 V DC ... 30 V DC |
| Power dissipation | typ. 0.1 W (No-load operation) |
| Shock (operation) | 30g (IEC 60068-2-27, Test Ea) |
| Channel LED yellow | flashing (Programming mode active) |
| Current consumption | typ. 0.4 mA (at 24 V DC) |
| Dielectric strength | max. 35 V DC (Load circuit) |
| Dimensional drawing | |
| Feedback resistance | max. 35 V DC |
| Input voltage range | 7 V DC ... 30 V DC (Reset with falling edge) |
| Number of positions | 1 |
| Rated surge voltage | 0.5 kV |
| Degree of protection | IP20 |
| Max. capacitive load | 4 mF (Depending on the current setting and the short-circuit current available) |
| Required backup fuse | Only required if Imaxof the power supply > the short-circuit switching capacity. Integrated failsafe element. |
| Temperature derating | 15 A (Total current at 60°C) |
| Measuring tolerance I | ± 8 % |
| Vibration (operation) | 10 Hz ... 59.6 Hz (Amplitude ±0.35 mm; in accordance with IEC 60068-2-6, Test Fc) |
| Overvoltage switch-off | ≥ 30.5 V DC (active) |
| Undervoltage switch-off | ≤ 9.2 V DC (active) |
| Standards/specifications | EN 61000-6-2 |
| Active current limitation | typ. 1,1 x IN |
| Closed circuit current I0 | typ. 3.8 mA |
| MTBF (IEC 61709, SN 29500) | 27746947 h (at 25 °C with 21 % load) |
| Module initialization time | 40 ms |
| Conductor cross section AWG | 24 ... 12 |
| Rated current (pre-adjusted) | 0.2 A |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (operation) | -30 °C ... 60 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Short-circuit switching capacity | 300 A |
| Flammability rating according to UL 94 | V-0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Waiting time after switch off of a channel | 5 s (at overload / short circuit) |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
Product Description
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.2 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
