In Stock Hot Product
FLT 100 N/PE-1.5
FLT 100 N/PE-1.5 2800303 PHOENIX CONTACT Combination type 1/2 protective device
$0.00USD
4105 in stock
Key Specifications
GTIN:4046356535236
Note:Made to Order (non-returnable)
Orderkey:2800303
(General):≤ 0.8 kV (at 3 kA)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356535236 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2800303 |
| (General) | ≤ 0.8 kV (at 3 kA) |
| Catalog page | Page 31 (C-6-2013) |
| Packing unit | 1 pc |
| Country of origin | DE (Germany) |
| Custom tariff number | 85363010 |
| (Ambient conditions) | TT |
| (UL connection data) | EN 61643-11 2012 |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| Color (Ambient conditions) | jet black RAL 9005 |
| Response time tA (General) | ≤ 100 ns |
| SPD Type (Connection data) | 4CA |
| Depth (Key Commercial Data) | 71.2 mm |
| Width (Key Commercial Data) | 35.6 mm |
| EN type (Ambient conditions) | T1 |
| Height (Key Commercial Data) | 90 mm |
| Nominal voltage UN (General) | 240 V AC (TN - only N-PE) |
| TOV behavior at UT (General) | 1200 V AC (200 ms / withstand mode) |
| Nominal frequency fN (General) | 50 Hz (60 Hz) |
| Residual current IPE (General) | ≤ 0.01 mA |
| Shock (operation) (Dimensions) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Rated load current IL (General) | 125 A (< 55 °C) |
| Residual voltage Ures (General) | ≤ 1.5 kV (at In) |
| Degree of protection (Dimensions) | IP20 (only when all terminal points are used) |
| Screw thread (Protective circuit) | M5 |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| Vibration (operation) (Dimensions) | 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
| Nominal frequency (Connection data) | 50/60 Hz |
| Mode of protection (Connection data) | N-G |
| Weight per Piece (excluding packing) | 378.700 g |
| Housing material (Ambient conditions) | PBT |
| Stripping length (Protective circuit) | 18 mm |
| Tightening torque (UL specifications) | 40 lbf-in. |
| Voltage protection level Up (General) | ≤ 1.5 kV |
| Connection method (Protective circuit) | Screw terminal blocks |
| Horizontal pitch (Key Commercial Data) | 2 Div. |
| Tightening torque (Protective circuit) | 4.5 Nm |
| Maximum continuous voltage UC (General) | 260 V AC |
| Mode of protection (Ambient conditions) | N-PE |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 1 |
| Standards/regulations (UL connection data) | IEC 61643-11 2011 |
| Power distribution system (Connection data) | Split phase |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | TN-S |
| IEC test classification (Ambient conditions) | I |
| Follow current interrupt rating Ifi (General) | 100 A (260 V AC) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Conductor cross section AWG (UL specifications) | 12 ... 2 |
| Conductor cross section AWG (Protective circuit) | 13 ... 2 |
| Conductor cross section solid (Protective circuit) | 2.5 mm² ... 35 mm² |
| Nominal discharge current In(N-G) (Connection data) | 20 kA |
| Surge protection fault message (Ambient conditions) | none |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Conductor cross section flexible (Protective circuit) | 2.5 mm² ... 25 mm² |
| Measured limiting voltage MLV (N-G) (Connection data) | 1080 V |
| Impulse discharge current (10/350) µs, charge (General) | 50 As |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Front of wave sparkover voltage at 6 kV (1.2/50) µs (General) | ≤ 1.5 kV |
| Impulse discharge current (10/350) µs, peak value limp (General) | 100 kA |
| Impulse discharge current (10/350) µs, specific energy (General) | 2500 kJ/Ω |
| Maximum continuous operating voltage MCOV (N-G) (Connection data) | 264 V AC |
Product Description
Lightning current discharger with encapsulated, single-channel N-PE arc arrester. Housing width 35 mm (2TE)
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
