CB E1 24DC/1A SI-C P

Parameter	Value
	18 V DC ... 30 V DC
Type	Male
Color	gray
Depth	52 mm
Width	12.3 mm
Height	45 mm
Fuse type	Electronic
Contact type	Without electrical isolation
Voltage drop	100 mV (at IN)
Humidity test	96 h, 95% RH, 40°C
Mounting type	On base element
Tripping method	E (electronic)
Pollution degree	2
Operating voltage	24 V DC
Power dissipation	0.4 W (Nominal operation)
Nominal current IN	1 A
Dielectric strength	max. 30 V DC (Load circuit)
Number of positions	1
Rated surge voltage	0.5 kV
Degree of protection	IP30 (Actuation area)
Required backup fuse	not required, integrated failsafe element
Temperature derating	1 A (at 50°C)
Complete module depth	77.3 mm
Complete module width	12.3 mm
Complete module height	90 mm
Standards/specifications	UL 2367 UL recognized
Active current limitation	typ. 1.25 x IN
Auxiliary type of contact	Positive-switching signal output
Closed circuit current I0	typ. 8 mA (When switched on)
Shutdown time load circuit	100 ms (see time/current characteristic curve)
Rated insulation voltage Ui	30 V (Load circuit)
Output current status output	max. 0.2 A (Short-circuit-proof)
Output voltage status output	24 V DC
Ambient temperature (operation)	-25 °C ... 50 °C (non-condensing)
Max. capacitive load load circuit	20000 µF
Undervoltage shutdown load circuit	< 14 V (typ. OFF)
Flammability rating according to UL 94	V0
Ambient temperature (storage/transport)	-40 °C ... 70 °C

Electronic device protection switch, 1-pole, active current limiting, inverted state output and command input, connector for base element.

Technical specifications and performance data

Installation and operation guide

CB E1 24DC/1A SI-C P 2905806 PHOENIX CONTACT Electronic device circuit breaker, 1-pos., active current limit..