In Stock Hot Product
ZX-XGC8A
ZX-XGC8A ZX 5010H ZXXGC8A OMRON Cable extension 8m sensor series ZX-G
$495.85USD
53 in stock
Key Specifications
Hold (Specifications):Sample hold, peak hold, bottom hold, peak-to-peak hold, average hold, delay hold
Item (Specifications):ZX-GIF11/-GIF11A
Other (Specifications):Measurement cycle setting, threshold setting, hysteresis setting, initialization, key lock
Material (Specifications):Case: PBT (polybutylene terephthalate), cover: Polycarbonate
Supplier Information
OMRON
Products: 41472
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Hold (Specifications) | Sample hold, peak hold, bottom hold, peak-to-peak hold, average hold, delay hold |
| Item (Specifications) | ZX-GIF11/-GIF11A |
| Other (Specifications) | Measurement cycle setting, threshold setting, hysteresis setting, initialization, key lock |
| Material (Specifications) | Case: PBT (polybutylene terephthalate), cover: Polycarbonate |
| Indicator (Specifications) | Power ON (green), controller communications (orange), controller communications error (red), RS-232C communications (orange),RS-232C communications error (red), binary output (orange) |
| Linearity (Specifications) | ±0.1% F.S.2 |
| Appearance (Specifications) | Separate type |
| Resolution (Specifications) | 10 µm (number of process values to average: 16)3 |
| Accessories (Specifications) | ZX-GIF_1A: Setup coftware (CD-ROM), 2 clamps, instruction sheetZX-GIF_1: 2 clamps, instruction sheet |
| Calculation (Specifications) | 2 possible on up to two controllers (calculation Unit ZX-CAL2 is required for connecting controllers to each other.) A-B, A+B, width |
| Output type (Specifications) | NPN |
| Cable length (Specifications) | RS-232C 0.5 m, binary output 2 m |
| Light source (Specifications) | Visible semiconductor laser diode (wavelength 650 nm, CLASS 1 of EN60825-1/IEC60825-1, CLASS of FDA(21CFR 1040.10 and 1040.11) |
| Analog output8 (Specifications) | For current output: 4 to 20 mA/F.S., max. load resistance 300ΩFor voltage output: ±4 V, (±5 V, 1 to 5 V9), output impedance 100Ω |
| Main functions (Specifications) | Number of registeredsetups |
| Measuring width (Specifications) | 28 mm |
| Timer functions (Specifications) | ON-delay, OFF-delay, one-shot |
| (Specifications & ordering info) | Order code |
| Ambient humidity (Specifications) | Operating and storage: 35% to 85% (with no condensation) |
| Measurement mode (Specifications) | Interrupted beam width measurement, incident beam width measurement, outer diameter measurement, center position measurement, IC lead pitch,IC lead width judgment, specified edge measurement, wire position measurement, glass edge position measurement |
| Sensing distance (Specifications) | 0 to 500 mm |
| DC (Specifications & ordering info) | NPN |
| Measurement cycle6 (Specifications) | 1.5 ms (standard mode (NORM))0.5 ms (high-speed mode (FAST))7 |
| Samples to average (Specifications) | 1/2/4/8/16/32/64/128/256/512/1024/2048/4096 |
| 1 m (Specifications & ordering info) | 1 m |
| 2 m (Specifications & ordering info) | ZX-XGC2A |
| 5 m (Specifications & ordering info) | ZX-XGC5A |
| 8 m (Specifications & ordering info) | ZX-XGC8A |
| Ambient temperature (Specifications) | Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation) |
| Communications port (Specifications) | RS-232C (9-pin D-sub connector) |
| Current consumption (Specifications) | 150 mA max. (including receiver) |
| Dielectric strength (Specifications) | 1,000 VAC, 50/60 Hz for 1 min |
| NPN (Specifications & ordering info) | ZX-GIF11A |
| PNP (Specifications & ordering info) | ZX-GIF41 |
| 20 m (Specifications & ordering info) | ZX-XGC20A |
| Adjustment functions (Specifications) | Optical axis adjust mode/light intensityt writing mode, variable binary level, variable edge filter, analog output scaling |
| Degree of protection (Specifications) | IEC60529 IP20 |
| Indicator (receiver) (Specifications) | Optical axis setting indicator (green) |
| Indicators (emitter) (Specifications) | Laser ON indicator (green), laser alarm indicator (red) |
| Name (Specifications & ordering info) | Order code |
| Power supply voltage (Specifications) | Supplied from controller (power consumption: 60 mA max.) |
| Type (Specifications & ordering info) | Optical system |
| Zero reset functions (Specifications) | Offset setting of zero reset value, zero reset value memory |
| Compatible controller (Specifications) | ZX-GTC11 |
| Insulation resistance (Specifications) | 20 MΩ(at 500 VDC megger) |
| Weight (packed state) (Specifications) | ZX-GIF_1A: Approx. 550 gZX-GIF_1: Approx. 330 g |
| Minimum sensing object (Specifications) | 0.5 mm dia.1 |
| Display duringmeasurement (Specifications) | Measured value, resolution, threshold, voltage output value, current output value (number of display digits can be changed) |
| Laser OFF input/sync input (Specifications) | ON: Short-circuited with 0 V or 1.5 V max.OFF: Open (leakage current: 0.1 mA max.) |
| Temperature characteristic (Specifications) | ±0.005% F.S./°C |
| Output type (Specifications & ordering info) | Order code |
| Power consumption (emitter) (Specifications) | 30 mA max. |
| Cable length (Specifications & ordering info) | Quantity |
| Power supply (Specifications & ordering info) | Output type |
| Separate type (Specifications & ordering info) | Through-beam |
| Power supply voltage (emitter) (Specifications) | 24 VDC+10%, -15% ripple (p-p) 10% max. |
| Standard cable (Specifications & ordering info) | Flexible cable |
| Integrated type (Specifications & ordering info) | 40 mm |
| Calculating unit (Specifications & ordering info) | ZX-CAL2 |
| Laser deterioration alarm output (Specifications) | NPN open-collector output30 VDC 20 mA max.Residual voltage 1.2 V max. |
| Smart monitor GT (Specifications & ordering info) | ZX-GSW11 |
| Vibration resistance(durability) (Specifications) | 10 to 150 Hz single-amplitude: 0.35 mm for 80 min each in X, Y and Z directions |
| Vibration resistance (durability) (Specifications) | 10 to 150 Hz single-amplitude: 0.75 mm for 80 min each in X, Y and Z directions |
| 12-bit binary output(D11 toD0, GATE) (Specifications) | NPN open-collector output30 VDC 20 mA max.Residual voltage 1.2 V max. |
| Operating ambient illumination(emitter) (Specifications) | 3,000 lx (incandescent light) |
| Operating ambient illumination(receiver) (Specifications) | 1,000 lx (incandescent light)5 |
| HIGH/PASS/LOWJudgment output10Sync output11 (Specifications) | NPN open-collector output30 VDC 50 mA max.Residual voltage 1.2 V max. |
| Timing input, bank switching input, zero reset input, reset input (Specifications) | ON: short-circuited with 0 V or 1.5 V max.OFF: Open (leakage current: 0.1 mA max.) |
Product Description
Extension cable 8m for ZX-G series sensors
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
Type
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
