

| Parameter | Value |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Coding | D |
| General | Contact connection method: Crimp connection |
| Shielded | yes |
| Bus system | PROFINET |
| Cable type | Sercos III [93K] |
| Head design | Socket |
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Sensor type | PROFINET |
| Thread type | M12 |
| Cable length | 0.5 m |
| Cable weight | 68 kg/km |
| Product type | Data cable preassembled |
| UL AWM Style | 21694 (60 °C / 600 V) |
| Overall twist | Star quad |
| Seal material | FKM |
| Signal runtime | 5.3 ns/m |
| Wave impedance | 100 Ω ±15 Ω (at 100 MHz) |
| AWG signal line | 22 |
| Article revision | 10 |
| Flame resistance | according to UL 1685 (CSA FT 4) |
| Head thread type | M12 |
| Other resistance | UV resistant (according to UL 1581, Section 1200) |
| Connection method | Cable connection |
| Head cable outlet | straight |
| Head locking type | SPEEDCON |
| Resistance to oil | Resistant to oil to a limited extent |
| Tightening torque | 2 Nm ... 3 Nm (Installation-side) |
| Conductor material | Tin-plated Cu litz wires |
| Contact resistance | ≤ 3 mΩ |
| Nominal current IN | 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) |
| Nominal voltage UN | 250 V |
| Single wire, color | white, yellow, blue, orange |
| Conductor structure | 1x4xAWG22/7, SF/TQ |
| Coupling resistance | ≤ 20.00 mΩ/m (at 10 Hz) |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 4 |
| Rated surge voltage | 2.5 kV |
| Transmission medium | Copper |
| Degree of protection | IP65/IP67 |
| No. of cable outlets | 1 |
| Overvoltage category | II |
| Signal type/category | PROFINET CAT5 (IEC 11801:2002), 100 Mbps |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| External sheath, color | signal red RAL 3020 |
| Nominal voltage, cable | 600 V |
| Outer sheath, material | PVC |
| Test voltage Core/Core | 2000 V (50 Hz, 1 min.) |
| Type of pair shielding | Aluminum-lined polyester foil |
| Conductor cross section | 4x 0.34 mm² |
| Contact connection type | Socket |
| External cable diameter | 6.50 mm ±0.2 mm |
| Thickness, outer sheath | approx. 0.90 mm |
| Contact carrier material | PA 6.6 |
| Contact surface material | Ni/Au |
| Material wire insulation | PE |
| Standards/specifications | IEC 61076-2-101 |
| Test voltage Core/Shield | 2000.00 V (50 Hz, 1 min.) |
| Max. conductor resistance | ≤ 120 Ω/km |
| Insertion/withdrawal cycles | ≥ 100 |
| Material for screw connection | Brass, nickel-plated |
| Wire diameter incl. insulation | approx. 1.55 mm |
| Ambient temperature (operation) | -40 °C ... 70 °C (cable, fixed installation) |
| Conductor structure signal line | 7x 0.25 mm |
| Ambient temperature (installation) | -20 °C ... 60 °C |
| Flammability rating according to UL 94 | V0 |
| Transmission characteristics (category) | CAT5 |
| Minimum bending radius, fixed installation | 3 x D |
| Smallest bending radius, fixed installation | 20 mm |
| Minimum bending radius, flexible installation | 7 x D |
| Smallest bending radius, movable installation | 46 mm |
Technical specifications and performance data
Installation and operation guide