

| Parameter | Value |
|---|---|
| 1201442 E/UK | |
| Note | Please observe the current carrying capacity of the DIN rails. |
| Color | green-yellow |
| Width | 12.2 mm |
| Height | 42.5 mm |
| output | (Permanent) |
| General | When aligning with a feed-through terminal block with the same shape, an end cover must be interposed with insulation voltages of > 690 V |
| Product type | Ground terminal block |
| Screw thread | M4 |
| Torque range | 1.5 Nm ... 1.8 Nm |
| Mounting type | NS 35/15-2,3 |
| Grounding foot | Yes |
| Identification | II 2 GD Ex eb IIC Gb |
| Number of rows | 1 |
| Depth on NS 15 | 52.6 mm |
| Depth on NS 32 | 59 mm |
| Open side panel | No |
| Article revision | 10 |
| Stripping length | 11 mm |
| Cross section AWG | 12 ... 4 (converted acc. to IEC) |
| Tightening torque | 1.5 ... 1.8 Nm |
| Depth on NS 35/15 | 61.5 mm |
| Degree of pollution | 3 |
| Depth on NS 35/7,5 | 54 mm |
| Insulating material | PA |
| Number of positions | 1 |
| Rated surge voltage | 8 kV |
| Overvoltage category | III |
| Nominal cross section | 16 mm² |
| Number of connections | 2 |
| Connection capacity AWG | 14 ... 4 |
| Rated cross section AWG | 6 |
| Terminal block mounting | 1.5 Nm ... 1.8 Nm (PE foot with mounting screw, M4) |
| Ex-certified accessories | 1205066 SZS 1,0X4,0 VDE |
| Torque range for PE foot | 1.5 Nm ... 1.8 Nm |
| Connection capacity rigid | 2.5 mm² ... 25 mm² |
| Insulating material group | I |
| Operating temperature range | -60 °C ... 110 °C |
| Connection capacity flexible | 4 mm² ... 16 mm² |
| Conductor cross section rigid | 2.5 mm² ... 25 mm² |
| Ambient temperature (assembly) | -5 °C ... 70 °C |
| Ambient temperature (actuation) | -5 °C ... 70 °C |
| Ambient temperature (operation) | -60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.) |
| Number of connections per level | 2 |
| Conductor cross section flexible | 4 mm² ... 16 mm² |
| Connection in acc. with standard | IEC 60947-7-2 |
| Permissible humidity (operation) | 20 % ... 90 % |
| Flammability rating according to UL 94 | V0 |
| Smoke gas toxicity NFPA 130 (SMP 800C) | passed |
| Ambient temperature (storage/transport) | -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Conductor cross section, flexible [AWG] | 10 ... 6 (converted acc. to IEC) |
| Permissible humidity (storage/transport) | 30 % ... 70 % |
| Surface flammability NFPA 130 (ASTM E 162) | passed |
| Static insulating material application in cold | -60 °C |
| Maximum power dissipation for nominal condition | 2.43 W |
| Calorimetric heat release NFPA 130 (ASTM E 1354) | 27,5 MJ/kg |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R26 | HL 1 - HL 3 |
| Specific optical density of smoke NFPA 130 (ASTM E 662) | passed |
| Flexible conductor cross section (ferrule with plastic sleeve) | 1.5 mm² ... 16 mm² |
| Relative insulation material temperature index (Elec., UL 746 B) | 130 °C |
| Conductor cross-section flexible (ferrule without plastic sleeve) | 1.5 mm² ... 16 mm² |
| Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) | 130 °C |
Technical specifications and performance data
Installation and operation guide