In Stock Hot Product
UNA1PK5PNJ-T
UNA1PK5PNJ-T NA1PK5PNJ NA1-PK5-PN-J PANASONIC Area sensor, 25 mm pitch, PNP, 12-24V DC, pigtail cable
$0.00USD
4022 in stock
Key Specifications
Item:Specifications
Cable:0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong
Output:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Details:PNP output [Standard type]
Supplier Information
PANASONIC
Products: 4316
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Item | Specifications |
| Cable | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Output | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Details | PNP output [Standard type] |
| Product | Ultra-slim Body Picking Sensor |
| Material | Enclosure: Heat-resistant ABSLens cover: AcrylicIndicator cover: Acrylic |
| Beam pitch | 25 mm0.984 in |
| Protection | IP62 (IEC) |
| Part Number | NA1-PK5-PN-J |
| Product name | Ultra-slim Body Picking Sensor NA1-PK5/NA1-5 |
| Response time | 10 ms or less (when the interference prevention is used, in Light state: 30 ms or less, in Dark state: 13 ms or less) |
| Sensing range | 0.1 to 1.2 m 0.328 to 3.937 ft (0.05 to 0.5 m 0.164 to 1.640 ft when set to SHORT)(Note) The sensing range is the possible setting distance between the emitter and the receiver. |
| Product Number | NA1-PK5-PN-J |
| Sensing height | 100 mm3.937 in |
| Sensing object | ø35 mmø1.378 inor more opaque object(completely beam interrupted object) |
| Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Cable extension | Extension up to total 100 m328.084 ftis possible for both emitter and receiver with 0.3 mm2, or more, cable. |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Emitting element | Infrared LED(Peak emission wavelength: 950 nm0.037 mil, synchronized scanning system) |
| Pollution degree | 3 (Industrial environment) |
| Shock resistance | 490 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Power consumption | Emitter: 0.6 W or lessReceiver: 0.9 W or less(Note) Obtain the current consumption by the following equation.Current consumption = Power consumption / Supply voltage(e.g.) When the supply voltage is 12 V, the current consumption of the emitter is0.5 W / 12 V ≈ 0.042 A = 42 mA |
| Indicators:Emitter | Power indicator: Green LED (lights up when the power is ON)Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch) |
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
| Ambient temperature | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Indicators:Receiver | Operation indicator: Red LED (lights up when one or more beam channels are interrupted, but lights up when two beam channels or more are interrupted in the double-beaminterruption mode)Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch) |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Number of beam channels | 5 beam channels |
| Output:Output operation | ON or OFF when one or more beam channels are interrupted / ON or OFF when two or more beam channels are interrupted, selectable by operation mode switch |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Output:Utilization category | DC-12 or DC-13 |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Output:Short-circuit protection | Incorporated |
| Interference prevention function | Incorporated |
Product Description
Area sensor, 5 beams, 0.1 to 1.2m, 25 mm beam spacing, PNP, 12-24 VDC, cable with M12
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
