

| Parameter | Value |
|---|---|
| Depth | 64 mm |
| Width | 78.5 mm |
| Height | 90 mm |
| Altitude | ≤ 2000 m |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Insulation | Reinforced insulation |
| Product type | Relay socket |
| Mounting type | DIN rail mounting |
| Article revision | 04 |
| Contact material | AgNi |
| Pollution degree | 2 |
| Connection method | Screw connection |
| Mounting position | any |
| Input voltage range | 21.6 V DC ... 26.4 V DC |
| Rated surge voltage | 6 kV (1.2/50 μs) |
| Degree of protection | IP00 |
| Overvoltage category | III |
| Standards/regulations | DIN EN 50178: 1998-04 |
| Contact switching type | Single contact, 1 changeover contact |
| Mechanical service life | 3x 107cycles |
| Nominal input voltage UN | 24 V DC |
| Rated insulation voltage | 260 V |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching capacity | 3000 VA |
| Conductor cross section AWG | 24 ... 12 |
| Limiting continuous current | 6 A (Limited by the width of the conductive paths in the output) |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Input voltage range in reference to UN | 0.9 ... 1.1 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Technical specifications and performance data
Installation and operation guide