

| Parameter | Value |
|---|---|
| Surge protection; Suppressor diode | |
| Color | green (RAL 6021) |
| Depth | 72 mm |
| Width | 22.5 mm |
| Height | 77 mm |
| Product type | Solid-state relay module |
| Screw thread | M3 |
| Assembly note | in rows with zero spacing |
| Mounting type | DIN rail mounting |
| Operating mode | 100% operating factor |
| With components | yes |
| Article revision | 05 |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Dimensional drawing | |
| Input voltage range | 4 V ... 32 V |
| Number of positions | 2 |
| Rated surge voltage | 8 kV |
| Overvoltage category | III |
| Number of connections | 1 |
| Standards/regulations | DIN EN 50178 |
| Contact switching type | 1 N/O contact (double contact) |
| Status display present | Yes |
| Status display/channel | Yellow LED |
| Nominal input voltage UN | 24 V DC |
| Maximum switching voltage | 230 V AC |
| Minimum switching voltage | 24 V AC |
| Conductor cross section AWG | 24 ... 12 |
| Housing insulation material | PVC, side panel PA non-reinforced, |
| Limiting continuous current | 5 A |
| Typical input current at UN | 2 mA (without plug-in module) |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Ambient temperature (operation) | -20 °C ... 60 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Error detection (line break / short-circuit) | no |
Technical specifications and performance data
Installation and operation guide