In Stock Hot Product
UM-D37SUB/M/HC3/16DI/MR/SI/MT
UM- D37SUB/M/HC3/16DI/MR/SI/MT 2900066 PHOENIX CONTACT Active module
$0.00USD
3145 in stock
Key Specifications
:TDIL11 (redundant)
Depth:66 mm
Width:344 mm
Height:126 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| TDIL11 (redundant) | |
| Depth | 66 mm |
| Width | 344 mm |
| Height | 126 mm |
| Altitude | ≤ 2000 m |
| Insulation | Functional insulation |
| Product type | Interface module |
| Screw thread | M3 |
| Assembly note | in rows with zero spacing |
| Mounting type | DIN rail mounting |
| Operating mode | 100% operating factor |
| No. of channels | 16 |
| Article revision | 04 |
| Contact material | Ag alloy, hard gold-plated |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | D-SUB pin strip |
| Mounting position | any |
| Suitable I/O card | TDIL01 (non-redundant) |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Protective circuit | Fuse |
| Input voltage range | 40.8 V DC ... 52.8 V DC |
| Number of positions | 37 |
| Rated surge voltage | 0.6 kV (1.2/50 μs) |
| Degree of protection | IP00 |
| Overvoltage category | II |
| Typical release time | 7 ms |
| Number of connections | 1 |
| Standards/regulations | EN IEC 60664-1 |
| Typical response time | 5 ms |
| Contact switching type | 1 N/O contact |
| Min. switching current | 1 mA (10 mA with damaged gold coating) |
| Status display present | Yes |
| Status display/channel | Yellow LED |
| Type of switch contact | Single contact |
| Mechanical service life | approx. 2x 107cycles |
| Nominal input voltage UN | 48 V DC |
| Rated insulation voltage | 63 V |
| Maximum switching voltage | 36 V DC (60 V DC with damaged gold coating) |
| Minimum switching voltage | 100 mV (12 V DC with damaged gold coating) |
| Conductor cross section AWG | 24 ... 12 |
| Limiting continuous current | 50 mA (500 mA with damaged gold coating) |
| Typical input current at UN | 6.5 mA |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Ambient temperature (operation) | -15 °C ... 50 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
| Input voltage range in reference to UN | 0.85 ... 1.1 |
| Ambient temperature (storage/transport) | -15 °C ... 50 °C |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Product Description
16-channel relay module for Honeywell C300 input cards. The module is activated on the control side via 37-pole D-SUB or 50-pole FLK. On the field side, a screw connection with knife interrupt is avai
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
