

| Parameter | Value |
|---|---|
| Depth | 65 mm |
| Width | 240 mm |
| Height | 143 mm |
| General | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Altitude | ≤ 2000 m |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Insulation | Basic insulation |
| Product type | Relay Module |
| Screw thread | UNC 4-40 |
| Mounting type | DIN rail mounting |
| Pollution degree | 2 |
| Connection method | D-SUB socket strip |
| Mounting position | any |
| Number of positions | 25 |
| Rated surge voltage | 2.5 kV (50 Hz, 1 min.) (The specified data only applies in connection with the optocouplers listed under “required accessories”) |
| Degree of protection | IP00 |
| Overvoltage category | III |
| Assembly instructions | in rows with zero spacing |
| Standards/regulations | DIN EN 50178: 1998-04 |
| Status display present | No |
| Nominal input voltage UN | 24 V DC |
| Maximum switching voltage | 24 V DC |
| Conductor cross section AWG | 24 ... 12 |
| Limiting continuous current | 1 A (per channel (2-conductor, floating)) |
| Typical input current at UN | 1 A (per channel) |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Connection in acc. with standard | DIN 41652/IEC 60807-2 |
| Input voltage range in reference to UN | 0.9 ... 1.1 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Technical specifications and performance data
Installation and operation guide