

| Parameter | Value |
|---|---|
| ADV561 | |
| Color | green (RAL 6021) |
| Depth | 60.5 mm |
| Width | 271.5 mm |
| Height | 127.5 mm |
| Altitude | ≤ 2000 m |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Product type | Interface module |
| Assembly note | in rows with zero spacing |
| Mounting type | DIN rail mounting |
| Operating mode | 100% operating factor |
| Article revision | 04 |
| Contact material | AgSnO |
| Pollution degree | 2 |
| Connection method | Yokogawa KS-compatible |
| Mounting position | any |
| Suitable I/O card | ADV551 |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Protective circuit | Freewheeling diode; Freewheeling diode |
| Dimensional drawing | |
| Input voltage range | 19.2 V DC ... 28.8 V DC |
| Number of positions | 50 |
| Rated surge voltage | 0.5 kV (Functional insulation) |
| Degree of protection | IP00 |
| Overvoltage category | II |
| Typical release time | 6 ms |
| Number of connections | 1 |
| Standards/regulations | EN 60664-1 |
| Typical response time | 5 ms |
| Contact switching type | 1 N/O contact |
| Min. switching current | 1 mA (24 V) |
| Status display present | Yes |
| Status display/channel | green LED |
| Type of switch contact | Single contact |
| Mechanical service life | 2x 107cycles |
| Nominal input voltage UN | 24 V DC |
| Rated insulation voltage | 50 V AC |
| Maximum switching voltage | 250 V AC |
| Minimum switching voltage | 5 V (100 mA) |
| Conductor cross section AWG | 24 ... 12 |
| Limiting continuous current | 1.5 A (32 °C) |
| Typical input current at UN | 7 mA |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Max. total current of voltage supply | 10 A (50 °C) |
| Interrupting rating (ohmic load) max. | 48 W (24 V DC) |
| Input voltage range in reference to UN | 0.8 ... 1.2 |
| Ambient temperature (storage/transport) | -20 °C ... 80 °C |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Technical specifications and performance data
Installation and operation guide