In Stock Hot Product
UFX551L3PJ
UFX551L3PJ FX-551L3-P-J PANASONIC Fiber amplifier, IO Link, double display, Pigtail M12 connector type 0.3m
$0.00USD
3990 in stock
Key Specifications
Item:Specifications
Cable:0.2 mm2cabtyre cable with M12 connector, 0.3 m0.984 ftlong
Remark:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23℃+73.4℉.
Weight:Net weight: 35 g approx., Gross weight: 60 g approx.
Supplier Information
PANASONIC
Products: 4316
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Item | Specifications |
| Cable | 0.2 mm2cabtyre cable with M12 connector, 0.3 m0.984 ftlong |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23℃+73.4℉. |
| Weight | Net weight: 35 g approx., Gross weight: 60 g approx. |
| Material | Enclosure, Case cover: Polycarbonate, Switch: Polyacetal |
| Protection | IP40 (IEC) |
| Part Number | FX-551L3-P-J |
| Product name | Digital Fiber Sensor FX-550L |
| Response time | STD: 250 μs or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable |
| Product Number | FX-551L3-P-J |
| Supply voltage | 12 to 24 V DC+10-15% Ripple P-P 10 % or less |
| Timer function | Incorporated with variable OFF-delay / ON-delay / One-shot, switchable either effective or ineffective |
| Cable extension | Extension up to total 20 m65.617 ftis possible with 0.3 mm2, or more, cable.(Condition of CE compliance: less tan 20 m65.617 ft) (however, supply voltage 12 V DC or more) |
| Shock resistance | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Power consumption | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 720 mW or less (current consumption 30 mA or less at 24 V supply voltage) |
| Ambient temperature | -10 to +55℃+14 to +131℉(If 4 to 7 units are mounted in cascade: -10 to +50℃+14 to +122℉or if 8 to 16 units are mounted in cascade: -10 to +45℃+14 to +113℉) (No dew condensation or icing allowed), Storage: -20 to +70℃-4 to +158℉ |
| Control output (DO) | PNP open-collector transistor• Maximum source current: 50 mA• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 2 V or less (Note) (at maximum source current)(Note:)In case of using the cable (cable length 2 m6.562 ft). |
| Sensitivity setting | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 G max.) in X, Y and Z directions for two hours each |
| Applicable regulations | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Timer function:Timer period | 0.1 to 999.9 ms approx., in units of 0.1 ms approx. |
| Emitting element (modulated) | Red LED (Peak emission wavelength: 660 nm 0.026 mil) |
| Incident light sensitivity setting | Incorporated, 4 steps |
| Communication output (C/Q):Baud rate | COM3 (230.4 kbps)(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| Control output (DO):Output operation | Switchable either Light-ON or Dark-ON by L/D mode |
| Incident light intensity display range | STD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999 |
| Communication output (C/Q):Process data | 4 byte(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| Control output (DO):Short-circuit protection | Incorporated |
| Communication output (C/Q):Minimum cycle time | 1.0 ms(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| Communication output (C/Q):IO-Link communication | IO-Link Specification V1.1(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| Different frequency interference prevention function | Incorporated (up to 4 units). Note that the response time varies depending on the setting.F-1: 0.8 ms or less, F-2: 0.9 ms or less, F-3: 1.0 ms or less, F-4: 1.7 ms or less(Note:)This function increases the hysteresis. Check the sensing condition when using the function. |
Product Description
FX-550L Series. F. Optical Amplifier, 1 PNP digital output, dual display, IO Link connection., M12 0.3m connector
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
