In Stock Hot Product
TDPT 4/ 2-SP-6,35-ZB BK
TDPT 4/ 2-SP-6,35-ZB BK 1019097 PHOENIX CONTACT Terminal for printed circuit board, pitch: 6.35 mm, number o..
$0.00USD
3102 in stock
Key Specifications
:1 mm² ... 6 mm² (Push-in connection)
Step:6.35 mm
Result:Approved Test
Amplitude:0.35 mm (10 Hz ... 60.1 Hz)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 1 mm² ... 6 mm² (Push-in connection) | |
| Step | 6.35 mm |
| Result | Approved Test |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Width [w] | 13.5 mm |
| frequency | 10 - 150 - 10 Hz |
| Height [h] | 26.9 mm |
| Length [l] | 20.75 mm |
| Pin Design | W zigzag pins |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Peel Length | 10 mm |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Product Line | COMBICON Terminals L |
| Product Type | Printed Circuit Board Terminal |
| Hole diameter | 1.7 mm |
| Article Review | 00 |
| Number of rows | 1 |
| Overall Height | 23.4 mm |
| Product Family | TDPT 4/.. -SP |
| Color (Housing) | Black (9005) |
| Connection type | Push-in spring connection |
| Nominal Section | 4 mm² |
| Number of poles | 2 |
| Test Directions | X, Y, and Z axes |
| Contact material | Cu Alloy |
| Dimension Scheme | |
| Performance Time | 5 s |
| Type of mounting | Wave soldering |
| Temple Dimensions | 1.7 x 0.8 mm |
| Tightening torque | 0.6 Nm ... 0.8 Nm |
| Type of packaging | Boxed Packaging |
| Nominal Current IN | 41 A |
| Nominal voltage UN | 1000 V |
| Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Insulating material | PA |
| Weld Pin Length [P] | 3.5 mm |
| AWG Conductor Section | 24 ... 10 |
| Color (Drive Element) | Orange (2003) |
| Nominal voltage (II/2) | 1000 V |
| Sizing voltage (III/3) | 800 V |
| Test duration per axis | 2.5 h |
| Rigid conductor section | 0.2 mm² ... 6 mm² (Conductor connection with open terminal point) |
| Surface Characteristics | Galvanically tinned |
| Heating test requirement | The sum of the ambient temperature and the heating of the PCB connection terminal cannot exceed the upper limit temperature. |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flexible conductor section | 0.2 mm² ... 6 mm² |
| Dimensioning voltage (III/2) | 1000 V |
| Ambient Temperature (Service) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Ambient Temperature (Mounting) | -5°C ... 105 °C |
| Nominal transient voltage (II/2) | 6 kV |
| Sizing Insulation Voltage (II/2) | 1000 V |
| Nominal transient voltage (III/2) | 8 kV |
| Nominal transient voltage (III/3) | 8 kV |
| Sizing Insulation Voltage (III/2) | 1000 V |
| Sizing Insulation Voltage (III/3) | 800 V |
| Minimum creepage line value (II/2) | 8 mm |
| Metal surface weld area (top layer) | Tin (10 - 16 μm Sn) |
| Minimum creepage line value (III/2) | 8 mm |
| Minimum creepage line value (III/3) | 10 mm |
| Number of Solder Pins Per Potential | 1 |
| Dimensioning transient voltage (II/2) | 6 kV |
| Flammability class according to UL 94 | V0 |
| Dimensioning Transient Voltage (III/2) | 8 kV |
| Dimensioning transient voltage (III/3) | 8 kV |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| 2 conductors with the same cross-section, rigid | 0.2 mm² ... 1.5 mm² |
| Metal surface of the terminal point (top layer) | Tin (10 - 16 μm Sn) |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Flexible conductor section with toe cap, with plastic sleeve | 0.2 mm² ... 4 mm² |
| Flexible conductor section with toe cap, without plastic sleeve | 0.2 mm² ... 4 mm² |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 8 mm |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 8 mm |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 8 mm |
| Conductor Section/Conductor Type/Tensile Force Nominal Value/Actual Value | 0.2 mm² / rigid / > 10 N |
| Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
| Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
| 2 conductors with the same cross-section, flexible with TWIN toe cap with plastic sleeve | 0.5 mm² ... 1.5 mm² |
Product Description
Terminal block for printed circuit board, nominal current: 41 A, nominal voltage (III/2): 1000 V, nominal section: 4 mm², number of rows: 1, number of poles per row: 2, article family: TDPT 4/.. -SP,
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
