

| Parameter | Value |
|---|---|
| 184 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| LTE | CAT4 |
| MTTF | 383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| Depth | 126 mm |
| Input | ± 2 kV (Test Level 3) |
| Width | 45 mm |
| Height | 130 mm |
| Signal | ± 2 kV (Ethernet) |
| Antenna | 50 Ω impedance SMA antenna socket |
| Voltage | 10 V |
| Comments | Criterion B |
| Data rate | ≤ 150 Mbps (LTE, DL) |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
| Mains type | Cellular communication |
| Management | Web-based management, SNMP |
| Web server | yes |
| Application | Ethernet |
| Certificate | N7NHL7518 |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Output name | Digital output |
| Product type | Remote maintenance gateway |
| Mounting type | DIN rail mounting |
| SIM Interface | 1.8 volt, 3 volt |
| Identification | Class I, Zone 2, AEx nA IIC T4 / Ex nA IIC T4 Gc |
| Noise immunity | EN 61000-6-2 |
| Country support | USA |
| Field intensity | 10 V/m |
| Frequency range | 700 MHz (LTE B13) |
| No. of channels | 2 (SELV) |
| Article revision | 02 |
| Discharge in air | ± 8 kV (Test Level 3) |
| Number of inputs | 1 |
| Pollution degree | 2 |
| Connection method | RJ45 jack, shielded |
| Contact discharge | ± 6 kV (Test Level 3) |
| Number of outputs | 1 |
| Material (Housing) | Plastic |
| Auxiliary protocols | ARP, DHCP, PING (ICMP), SNMP V1, SMTP |
| Protocols supported | TCP/IP, UDP/IP, FTP, HTTP |
| Transmission length | 100 m (shielded twisted pair) |
| Degree of protection | IP20 (Manufacturer's declaration) |
| Electrical isolation | VCC // LTE // Ethernet // PE |
| Supply voltage range | 10 V DC ... 30 V DC (SELV) |
| Voltage input signal | 10 V DC ... 30 V DC |
| Current output signal | ≤ 50 mA (Not short-circuit proof) |
| Interface description | LTE (FDD) |
| Standards/regulations | EN 61000-4-2 |
| Voltage output signal | 10 V DC ... 30 V DC (depending on the operating voltage) |
| Description of the input | Digital input |
| Antenna connection method | SMA (female) |
| Serial transmission speed | 10/100 Mbps, auto negotiation |
| Color (Upper housing part) | gray (RAL 7042) |
| Switching level "1" signal | 10 V DC ... 30 V DC |
| Conductor cross section AWG | 26 ... 16 |
| Typical current consumption | < 200 mA (24 V DC) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Ambient temperature (operation) | 0 °C ... 60 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Single-wire/terminal point, flexible | 0.14 mm² ... 1.5 mm² |
| Single conductor/terminal point, rigid | 0.14 mm² ... 1.5 mm² |
| Ambient temperature (storage/transport) | 0 °C ... 60 °C |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Emitted radio interference in acc. with EN 55011 | Class B, area of application: Industry and residential |
| Radio interference voltage in acc. with EN 55011 | Class B, area of application: Industry and residential |
Technical specifications and performance data
Installation and operation guide