

| Parameter | Value |
|---|---|
| 24 V | |
| 48 V | |
| 60 V | |
| AC-3 | |
| 120 V | |
| 230 V | |
| 400 V | P |
| 440 V | Theand |
| 500 V | |
| 690 V | |
| Notes | |
| Power | |
| a day | |
| AC-21A | |
| AC-23A | |
| Design | |
| in case | |
| 120 V AC | |
| 200 V AC | |
| 240 V AC | |
| 480 V AC | |
| 600 V AC | |
| Contacts | |
| lockable | |
| 400/415 V | |
| max. Fuse | |
| 400V 415 V | Theand |
| Assortment | |
| Dc voltage | |
| Pilot Duty | |
| 220 V 230 V | P |
| 400 V 415 V | P |
| General Use | TheU |
| General use | |
| UL File No. | |
| three-phase | |
| Basic Rating | |
| CSA File No. | |
| Main circuit | |
| Suitable for | |
| single-phase | |
| CSA Class No. | |
| Detector type | |
| Circuit symbol | |
| Relay contacts | |
| The ac voltage | |
| power at 400 V | |
| Mechanical life | Maneuvers |
| No. plate front | |
| Number of poles | |
| number of poles | |
| Screw connection | |
| Shock resistance | |
| High fault rating | |
| Mechanical values | |
| Mounting position | |
| Product Standards | |
| Tightening torque | |
| Auxiliary contacts | |
| number of switches | |
| Ambient temperature | |
| rigid or semi-rigid | |
| Degree of Protection | |
| Degree of protection | |
| Maximum engine power | |
| between the contacts | |
| motor drive optional | |
| with fuses max load. | |
| Electrical parameters | |
| Short-circuit current | Iq |
| STARTING FROM 25 % AND | |
| STARTING FROM 40 % AND | |
| STARTING FROM 60 % AND | |
| motor drive integrated | |
| running as an inverter | |
| Rated operating voltage | Uand |
| UL Category Control No. | |
| Connection cross-sections | |
| Nominal operating current | Theand |
| operating voltage nominal | |
| type of protection (NEMA) | |
| auxiliary voltage optional | |
| running as a safety switch | |
| North America Certification | |
| Rated uninterrupted current | Theu |
| Resistance to short circuit | |
| Suitability to the climates | |
| Switching frequency maximum | Operations/h |
| Short Circuit Current Rating | |
| execution as the main switch | |
| Compliance with the standards | |
| Rated power use switch engine | P |
| nominal continuous current Iu | |
| Continuous current rating max. | |
| rigid or flexible with ferrule | |
| the color of the drive element | |
| DC-1, break Switches L/R = 1 ms | |
| Rated voltage impulse withstand | Uimp |
| run as the emergency stop device | |
| Slicer safe according to EN 61140 | |
| suitable for fixing to the ground | |
| Tightening torque connection screw | |
| suitable for building intermediate | |
| the execution of the drive element | |
| DC-23A, switches, motor L/R = 15 ms | |
| suitable for fixing to front center | |
| suitable for mounting front 4 holes | |
| resistance to short-time current Icw | |
| Overvoltage category/pollution degree | |
| Rated power of use AC-23A, 50 - 60 Hz | |
| degree of protection (IP), front side | |
| operating power rated for AC-23, 400V | |
| operating power rated for AC-3, 400 V | |
| Note on rated uninterrupted current Iu | |
| running as a switch maintenance/repair | |
| the type of construction of the device | |
| max. operating voltage nominal Ue to AC | |
| suitable for mounting on the distributor | |
| Interrupting rating cos ϕ to IEC 60947-3 | |
| The nominal current of use power switches | |
| nominal continuous current at AC-23, 400V | |
| Information on the magnitude of the supply | |
| The load function is intermittent, Class 12 | |
| Voltage on each contact to insert in series | |
| nominal continuous current for AC-21, 400 V | |
| Flexible with ferrule according to DIN 46228 | |
| Rated current operation, switches for motors | |
| Rated closing cos ϕ according to IEC 60947-3 | |
| number of auxiliary contacts, power inverters | |
| Resistance to short-time current (Current 1-s) | Thecw |
| number of auxiliary contacts, closing contacts | |
| short-circuit current the rated conditional Iq | |
| type of connection circuit in the main electrical | |
| Losses for the joule effect by contact with Theand | |
| The reliability of the contacts for 24 V DC, 10 mA | Probability of error |
| number of auxiliary contacts, the contacts of the rest | |
| Note on the current permissible rated short-time current Icw |
Technical specifications and performance data
Installation and operation guide