

| Parameter | Value |
|---|---|
| Reverse polarity protection; Polarity protection diode | |
| Color | green (RAL 6021) |
| Depth | 66.5 mm |
| Width | 20.8 mm |
| Height | 33 mm |
| Insulation | Basic insulation |
| Coil voltage | 24 V DC |
| Product type | Relay Module |
| Assembly note | in rows with zero spacing |
| Mounting type | Plug-in mounting |
| Operating mode | 100% operating factor |
| Article revision | 09 |
| Contact material | AgSnO |
| Drive (polarity) | polarized |
| Pollution degree | 2 |
| Pulse time range | 30 ms ... 5 s |
| Mounting position | any |
| Drive and function | bistable |
| Protective circuit | Freewheeling diode; Freewheeling diode |
| Input voltage range | 19.2 V DC ... 26.4 V DC (20 °C) |
| Rated surge voltage | 2.5 kV |
| Overvoltage category | II |
| Typical release time | 5 ms |
| Standards/regulations | DIN EN 50178 |
| Typical response time | 5 ms |
| Contact switching type | 1 changeover contact |
| Maximum inrush current | 8 A |
| Min. switching current | 1 mA (at 24 V) |
| Type of switch contact | Single contact |
| Mechanical service life | approx. 107cycles |
| Nominal input voltage UN | 24 V DC |
| Rated insulation voltage | 250 V AC |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 5 V (At 5 V) |
| Limiting continuous current | 6 A |
| Typical input current at UN | typ. 8 mA |
| Date of last data management | 02.05.2024 |
| Test voltage (Winding/contact) | 2 kVrms(50 Hz, 1 min., winding/contact) |
| Ambient temperature (operation) | -40 °C ... 50 °C |
| Interrupting rating (ohmic load) max. | 144 W (at 24 V DC) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Maximum power dissipation for nominal condition | 0.19 W |
Technical specifications and performance data
Installation and operation guide