

| Parameter | Value |
|---|---|
| Surge protection Varistor | |
| Depth | 112 mm |
| Width | 20.8 mm |
| Height | 42.5 mm |
| Contact type | Single contact, 1-PDT |
| Contact material | AgNi |
| Pollution degree | 2 |
| Mounting position | any |
| Protective circuit | Bridge rectifier Bridge rectifier |
| Overvoltage category | III |
| Typical release time | 11 ms |
| Standards/regulations | IEC 60664 |
| Typical response time | 8 ms |
| Maximum inrush current | 8 A |
| Mechanical service life | Approx. 2 x 107cycles |
| Nominal input voltage UN | 120 V AC |
| Maximum switching voltage | 250 V AC/DC |
| Operating voltage display | Yellow LED |
| Limiting continuous current | 6 A |
| Typical input current at UN | 19 mA |
| Rated surge voltage/insulation | Basic insulation |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Interrupting rating (ohmic load) max. | 95 W (at 24 V DC) |
| Input voltage range in reference to UN | 0.85 ... 1.1 |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Test voltage relay winding/relay contact | 2.5 kV AC (50 Hz, 1 min.) |
Technical specifications and performance data
Installation and operation guide