In Stock Hot Product
SPT-THR 1,5/ 4-H-3,5 P26 R32
SPT-THR 1,5/ 4-H-3,5 P26 R32 1125304 PHOENIX CONTACT Terminal for printed circuit board, pitch: 3.5 mm, numb..
$0.00USD
3924 in stock
Key Specifications
:0.2 mm² / flexible / > 10 N
Step:3.5 mm
Result:Approved Test
Process:Reflow/Wave Soldering
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Step | 3.5 mm |
| Result | Approved Test |
| Process | Reflow/Wave Soldering |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| ESD Level | (D) Electrostatically conductive |
| Width [w] | 14.5 mm |
| frequency | 10 - 150 - 10 Hz |
| Height [h] | 10.3 mm |
| Length [l] | 13.6 mm |
| Pin Design | Linear Pin Arrangement |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Peel Length | 8 mm |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Product Line | COMBICON Terminals S |
| Product Type | Printed Circuit Board Terminal |
| Hole diameter | 1.1 mm |
| Article Review | 02 |
| Belt Width [W] | 32 mm |
| Number of rows | 1 |
| Overall Height | 7.7 mm |
| Product Family | SPT 1.5/.. -H-THR |
| Color (Housing) | Black (9005) |
| Connection type | Push-in spring connection |
| Nominal Section | 1.5 mm² |
| Number of poles | 4 |
| Test Directions | X, Y, and Z axes |
| Contact material | Cu Alloy |
| Dimension Scheme | |
| Performance Time | 5 s |
| Type of mounting | THR welding/wave welding |
| Coil Diameter [A] | 330 mm |
| Temple Dimensions | 0.7 x 0.3 mm |
| Type of packaging | 32 mm wide strap |
| Nominal Current IN | 17.5 A |
| Nominal voltage UN | 160 V |
| Outer packing type | Transparent Bag |
| Test Specification | DIN EN 60998-2-2 (VDE 0613-2-2):2005-03 |
| Insulating material | LCP |
| Weld Pin Length [P] | 2.6 mm |
| Number of potentials | 4 |
| Spacing between rods | 7 mm |
| AWG Conductor Section | 24 ... 16 |
| Color (Drive Element) | White (9010) |
| Number of connections | 4 |
| Nominal voltage (II/2) | 320 V |
| Sizing voltage (III/3) | 160 V |
| Test duration per axis | 2.5 h |
| Rigid conductor section | 0.2 mm² ... 1.5 mm² |
| Surface Characteristics | Malleable cast iron tinning |
| Heating test requirement | The sum of the ambient temperature and the heating of the PCB connection terminal cannot exceed the upper limit temperature. |
| Moisture Sensitive Level | MSL 1 |
| Installation Instructions | The item is not suitable for PCB cleaning with liquids. |
| Insulating material group | IIIa |
| Welding cycles. by reflux | 3 |
| CTI according to IEC 60112 | 175 |
| Flexible conductor section | 0.2 mm² ... 1.5 mm² |
| Dimensioning voltage (III/2) | 160 V |
| Ambient Temperature (Service) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Classification Temperature Tc | 260 °C |
| Ambient Temperature (Mounting) | -5 °C ... 100 °C |
| External Coil Measurements [W2] | 38.4 mm |
| Nominal transient voltage (II/2) | 2.5 kV |
| Sizing Insulation Voltage (II/2) | 320 V |
| Nominal transient voltage (III/2) | 2.5 kV |
| Nominal transient voltage (III/3) | 2.5 kV |
| Sizing Insulation Voltage (III/2) | 160 V |
| Sizing Insulation Voltage (III/3) | 160 V |
| Minimum creepage line value (II/2) | 3.2 mm |
| Metal surface weld area (top layer) | Tin (4 - 8 μm Sn) |
| Minimum creepage line value (III/2) | 1.6 mm |
| Minimum creepage line value (III/3) | 2.5 mm |
| Number of Solder Pins Per Potential | 2 |
| Insulation Resistance Adjacent Poles | > 5 MΩ |
| Dimensioning transient voltage (II/2) | 2.5 kV |
| Flammability class according to UL 94 | V0 |
| Dimensioning Transient Voltage (III/2) | 2.5 kV |
| Dimensioning transient voltage (III/3) | 2.5 kV |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Metal surface of the terminal point (top layer) | Tin (4 - 8 μm Sn) |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 175 |
| Flexible conductor section with toe cap, with plastic sleeve | 0.2 mm² ... 0.75 mm² |
| Flexible conductor section with toe cap, without plastic sleeve | 0.2 mm² ... 1.5 mm² |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 1.5 mm |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 1.5 mm |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 1.5 mm |
| Conductor Section/Conductor Type/Tensile Force Nominal Value/Actual Value | 0.2 mm² / rigid / > 10 N |
Product Description
Terminal block for printed circuit board, nominal current: 13.5 A, nominal voltage (III/2): 160 V, nominal section: 1.5 mm², number of potentials: 4, number of rows: 1, number of poles per row: 4, art
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
