In Stock Hot Product
SPT 2,5/10-V-5,0 GY BD:33-4-Q
SPT 2,5/10-V-5,0 GY BD:33-4-Q 1846738 PHOENIX CONTACT Terminal for printed circuit board, nominal current: 2..
$0.00USD
4547 in stock
Key Specifications
:Cross-section: 0.34 mm²; Length: 7 mm
Step:5 mm
Result:Approved Test
Amplitude:0.35 mm (10 Hz ... 60.1 Hz)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Cross-section: 0.34 mm²; Length: 7 mm | |
| Step | 5 mm |
| Result | Approved Test |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Width [w] | 51.4 mm |
| frequency | 10 - 150 - 10 Hz |
| Height [h] | 16.9 mm |
| Length [l] | 13.5 mm |
| Pin Design | Linear Pin Arrangement |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Peel Length | 10 mm |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| application | without intermediate step piece |
| Acceleration | 50 m/s² (60.1 Hz ... 150 Hz) |
| Product Line | COMBICON Terminals M |
| Product Type | Printed Circuit Board Terminal |
| Hole diameter | 1.2 mm |
| Article Review | 00 |
| Number of rows | 1 |
| Overall Height | 14.4 mm |
| Product Family | SPT 2.5/.. -V |
| Color (Housing) | Grey (7042) |
| Connection type | Push-in spring connection |
| Nominal Section | 2.5 mm² |
| Number of poles | 10 |
| Test Directions | X, Y, and Z axes |
| Contact material | Cu Alloy |
| Performance Time | 5 s |
| Type of mounting | Wave soldering |
| Type of packaging | Boxed Packaging |
| Nominal Current IN | 24 A |
| Nominal voltage UN | 400 V |
| Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Insulating material | PA |
| Weld Pin Length [P] | 2.5 mm |
| Number of potentials | 10 |
| Spacing between rods | 8.2 mm |
| AWG Conductor Section | 24 ... 12 |
| Number of connections | 10 |
| Nominal voltage (II/2) | 630 V |
| Sizing voltage (III/3) | 250 V |
| Test duration per axis | 2.5 h |
| Rigid conductor section | 0.2 mm² ... 4 mm² |
| Surface Characteristics | Galvanically tinned |
| Heating test requirement | The sum of the ambient temperature and the heating of the PCB connection terminal cannot exceed the upper limit temperature. |
| Recommended crimp pliers | 1212034 CRIMPFOX 6 |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flexible conductor section | 0.2 mm² ... 2.5 mm² |
| Dimensioning voltage (III/2) | 400 V |
| Ambient Temperature (Service) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Ambient Temperature (Mounting) | -5 °C ... 100 °C |
| Nominal transient voltage (II/2) | 4 kV |
| Sizing Insulation Voltage (II/2) | 630 V |
| Nominal transient voltage (III/2) | 4 kV |
| Nominal transient voltage (III/3) | 4 kV |
| Sizing Insulation Voltage (III/2) | 400 V |
| Sizing Insulation Voltage (III/3) | 250 V |
| Minimum creepage line value (II/2) | 3.2 mm |
| Metal surface weld area (top layer) | Tin (4 - 8 μm Sn) |
| Minimum creepage line value (III/2) | 3 mm |
| Minimum creepage line value (III/3) | 3.2 mm |
| Number of Solder Pins Per Potential | 2 |
| Insulation Resistance Adjacent Poles | > 5 MΩ |
| Dimensioning transient voltage (II/2) | 4 kV |
| Flammability class according to UL 94 | V0 |
| Dimensioning Transient Voltage (III/2) | 4 kV |
| Dimensioning transient voltage (III/3) | 4 kV |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Metal surface of the terminal point (top layer) | Tin (4 - 8 μm Sn) |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| toe caps with insulated collar, according to DIN 46228-4 | Cross-section: 0.25 mm²; Length: 8 mm |
| Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Flexible conductor section with toe cap, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| toe caps without insulating collar, according to DIN 46228-1 | Cross-section: 0.25 mm²; Length: 7 mm |
| Flexible conductor section with toe cap, without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 3 mm |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 3 mm |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 3 mm |
| Conductor Section/Conductor Type/Tensile Force Nominal Value/Actual Value | 0.2 mm² / rigid / > 10 N |
| Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
| Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
Product Description
Terminal block for printed circuit board, nominal current: 24 A, nominal voltage (III/2): 400 V, nominal section: 2.5 mm², number of potentials: 10, number of rows: 1, number of poles per row: 10, art
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
