In Stock Hot Product
SPT 2,5/ 1-V-5,0 SWO
SPT 2,5/ 1-V-5,0 SWO 1833107 PHOENIX CONTACT PCB terminal block, nominal current: 24 A, nom. voltage: 400 V,..
$0.00USD
4810 in stock
Key Specifications
EAN:Four trillion forty six billion three hundred fifty six million nine hundred thirteen thousand three hundred forty eight
Key order:One million eight hundred thirty three thousand one hundred seven
(Drawings):
Key selling:AAACBA -
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| EAN | Four trillion forty six billion three hundred fifty six million nine hundred thirteen thousand three hundred forty eight |
| Key order | One million eight hundred thirty three thousand one hundred seven |
| (Drawings) | |
| Key selling | AAACBA - |
| Packing unit | 100 pcs |
| Step (Drawings) | 5 mm |
| ETIM 5.0 (eCl@ss) | EC002643 |
| ETIM 6.0 (eCl@ss) | EC002643 |
| ETIM 7.0 (eCl@ss) | EC002643 |
| UNSPSC 13.2 (ETIM) | Thirty nine million one hundred twenty one thousand four hundred thirty two |
| UNSPSC 18.0 (ETIM) | Thirty nine million one hundred twenty one thousand four hundred thirty two |
| UNSPSC 19.0 (ETIM) | Thirty nine million one hundred twenty one thousand four hundred thirty two |
| UNSPSC 20.0 (ETIM) | Thirty nine million one hundred twenty one thousand four hundred thirty two |
| UNSPSC 21.0 (ETIM) | Thirty nine million one hundred twenty one thousand four hundred thirty two |
| Rated (Tensile test) | 24 To |
| Tariff number tariff | Eighty five million three hundred sixty nine thousand ten |
| eCl@ss 5.1 (Ratings) | Twenty seven million two hundred sixty one thousand one hundred |
| eCl@ss 6.0 (Ratings) | Twenty seven million two hundred sixty one thousand one hundred |
| eCl@ss 7.0 (Ratings) | Twenty seven million four hundred forty thousand four hundred one |
| eCl@ss 8.0 (Ratings) | Twenty seven million four hundred forty thousand four hundred one |
| eCl@ss 9.0 (Ratings) | Twenty seven million four hundred forty thousand four hundred one |
| Minimum order quantity | 100 pcs |
| Abbreviation (Drawings) | Terminal for printed circuit board |
| Mounting type (Drawings) | Wave soldering |
| Dry heat (Test vibration) | 168 h/100 °C |
| Number of poles (Drawings) | One |
| (Environmental conditions) | Test approved |
| Moist heat (Test vibration) | 48 h/30 °C/92 % |
| Number of floors (Drawings) | One |
| Design of the pin (Drawings) | Available pin dual linear |
| Observation (Ability conex.) | According to WEEE/RoHS, without filaments according to IEC 60068-2-82/JEDEC JESD 201 |
| Result (Took place. calent.) | Test approved |
| Family of articles (Drawings) | SPT 2,5/..-V |
| Type of connection (Drawings) | Connection by spring loaded push-in |
| Number of potential (Drawings) | One |
| Step (Material data - housing) | 5 mm |
| (Standards and specifications) | No dangerous substances above the thresholds |
| Amplitude (Took place. calent.) | 0.35 mm (10 - with 60.1 Hz) |
| Frequency (Took place. calent.) | 10 - 150 - 10 Hz |
| Number of connections (Drawings) | One |
| Section of driver (Tensile test) | 2.5 mm2 |
| Material contact (Ability conex.) | Cu alloy |
| Sweep speed (Took place. calent.) | 1 octave/min |
| Unit weight (excluding packaging) | 1,357 g |
| Acceleration (Took place. calent.) | 5 g (with 60.1 - 150 Hz) |
| Diameter hole (Product dimensions) | 1.1 mm |
| Isolation (Material data - contact) | PA |
| Width [ w ] (Material data - housing) | 5 mm |
| (Connection and method of connection) | 2.5 mm2 / flexible / > 50 N |
| Height [ h ] (Material data - housing) | 16,9 mm |
| Length [ l ] (Material data - housing) | 13.5 mm |
| Color housing (Material data - contact) | green (6021) |
| Result (Lines of flight and air spaces) | Test approved |
| China RoHS (Standards and specifications) | Space of time for the intended use: unlimited = FEUP-e |
| Rated current (Properties of the article) | 24 To |
| Rated voltage (Properties of the article) | 400 V |
| Tension and sizing (III/2) (Tensile test) | 400 V |
| Tension sizing (Properties of the article) | 250 V |
| Check connection (Environmental conditions) | DIN EN 60998-2-2 (VDE 0613-2-2):2005-03 |
| Dimensions of pin (Material data - housing) | 0.8 x 0.8 mm |
| Length of pin [P] (Material data - housing) | 2.5 mm |
| Outline dimensions (Material data - housing) | |
| Separation between rods (Product dimensions) | 8,2 mm |
| Specification of the test (Electrical testing) | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| Characteristics of the surface (Ability conex.) | tinning of malleable cast iron |
| Duration of test per axis (Took place. calent.) | 2.5 h |
| Specification of the test (Took place. calent.) | DIN EN 60068-2-6:1996-05 |
| Transient voltage design (III/2) (Tensile test) | 4 kV |
| Separation between rods (Material data - housing) | 8,2 mm |
| The result of the test (Environmental conditions) | Test approved |
| Length of peeling (Characteristic data electrical) | 10 mm |
| Tensile test (Connection and method of connection) | DIN EN 60998-2-2 (VDE 0613-2-2):2005-03 |
| Air spaces and lines of flight (Electrical testing) | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| Group insulating material (Material data - contact) | I |
| Room temperature (service) (Indications of packing) | -40 °C ... 100 °C (depending of the capability curve of a load current/derating) |
| Type of connection (Characteristic data electrical) | Connection by spring loaded push-in |
| CTI according to IEC 60112 (Material data - contact) | Six hundred |
| Tension and sizing (II/2) (Properties of the article) | 630 V |
| Tension and sizing (III/2) (Properties of the article) | 400 V |
| Ambient temperature (assembly) (Indications of packing) | -5 °C ... 100 °C |
| Specification of the test (Lines of flight and air spaces) | DIN EN 60998-2-1 (VDE 0613-2-1):2005-03 |
| Metal surface area of solder (upper layer) (Ability conex.) | Tin (4 - 8 ám Sn) |
| Section of conductor rigid (Characteristic data electrical) | 0,2 mm2 ... 4 mm2 |
| Transient voltage design (II/2) (Properties of the article) | 4 kV |
| Transient voltage design (III/2) (Properties of the article) | 4 kV |
| Transient voltage design (III/3) (Properties of the article) | 4 kV |
| Section of flexible conductor (Characteristic data electrical) | 0,2 mm2 ... 2.5 mm2 |
| Minimum value of the line of flight (II/2) (Electrical testing) | 3.2 mm |
| Minimum value of the line of flight (III/2) (Electrical testing) | 3 mm |
| Minimum value of the line of flight (III/3) (Electrical testing) | 3.2 mm |
| Section of conductor AWG / kcmil (Characteristic data electrical) | 24 ... 12 |
| Ambient temperature (storage / transport) (Indications of packing) | -40 °C ... 70 °C |
| Class of flammability according to UL 94 (Material data - contact) | V0 |
| Metal surface of the point of embornaje (top layer) (Ability conex.) | Tin (4 - 8 ám Sn) |
| Minimum value of air gap - field inhomogéneo (II/2) (Electrical testing) | 3 mm |
| Minimum value of air gap - field inhomogéneo (III/2) (Electrical testing) | 3 mm |
| Minimum value of air gap - field inhomogéneo (III/3) (Electrical testing) | 3 mm |
| Type of packaging (Dimensions for the design of the printed circuit board) | packaged in box |
| Checking of damage in the conductors and loosening (Environmental conditions) | DIN EN 60998-2-2 (VDE 0613-2-2):2005-03 |
| Designation packing Units (Dimensions for the design of the printed circuit board) | Units |
| Height of building (height without the shank of soldering) (Material data - housing) | 14,4 mm |
| Ignition temperature of filaments GWIT according to en 60695-2-13 (Material data - contact) | Seven hundred seventy five |
| Section of flexible conductor with toe, with plastic sleeve (Characteristic data electrical) | 0.25 mm2 ... 1.5 mm2 (Length desaislar 8 mm) |
| Number of flammability of filaments GWFI according to en 60695-2-12 (Material data - contact) | Eight hundred fifty |
| Section of the driver / type of driver / traction force (Connection and method of connection) | 0,2 mm2 / stiff / > 10 N |
| Section of flexible conductor with toe cap, without plastic sleeve (Characteristic data electrical) | 0.25 mm2 ... 2.5 mm2 (Length desaislar 8 mm) |
| Temperature test of the hardness for the balls according to en 60695-10-2 (Material data - contact) | 125 °C |
| Connection according to standard (Resistance to aging, moisture and the penetration of solid objects) | EN-VDE |
Product Description
Terminal block for printed circuit board, nominal current: 24 A, dimensioning voltage (III/2): 400 V, nominal section: 2.5 mm², pitch: 5 mm, number of poles: 1, connection type: Push-in spring connect
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
DiagramType: SPT 2,5/ 5-V-5,0Test based on DIN en 60512-5-2:2003-01Reduction Factor = 1Number of poles: 5
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
