In Stock Hot Product
SPT 16/ 1-V-10,0 BU
SPT 16/ 1-V-10,0 BU 1712550 PHOENIX CONTACT Terminal for printed circuit board, rated voltage: 1000 V, pitch..
$0.00USD
4761 in stock
Key Specifications
:0.75 mm² ... 16 mm² (Push-in connection)
Note:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Type:PC terminal block can be aligned
Pitch:10 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0.75 mm² ... 16 mm² (Push-in connection) | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Type | PC terminal block can be aligned |
| Pitch | 10 mm |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 11.8 mm |
| Height [h] | 35.4 mm |
| Length [l] | 24.7 mm |
| Pin layout | Linear pinning |
| Pin spacing | 15 mm |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Product line | COMBICON Terminals XL |
| Product type | Printed circuit board terminal |
| Hole diameter | 1.7 mm |
| Mounting type | Wave soldering |
| Specification | IEC 60999-1:1999-11 |
| Number of rows | 1 |
| Pin dimensions | 1.2 x 1 mm |
| Product family | SPT 16/..-V |
| Color (Housing) | blue (5015) |
| Test directions | X-, Y- and Z-axis |
| Article revision | 00 |
| Contact material | Cu alloy |
| Installed height | 31.3 mm |
| Stripping length | 18 mm |
| Time of exposure | 5 s |
| Connection method | Push-in spring connection |
| Type of packaging | packed in cardboard |
| Nominal current IN | 76 A |
| Nominal voltage UN | 1000 V |
| Notes on operation | The single-position PCB terminal block can be used for voltages up to 1500 V (DC) and 1000 V (AC). The relevant device standard and the appropriate required air clearances and creepage distances should be observed following installation |
| Dimensional drawing | |
| Insulating material | PA |
| Number of positions | 1 |
| Number of potentials | 1 |
| Rated voltage (II/2) | 1000 V |
| Nominal cross section | 16 mm² |
| Number of connections | 1 |
| Rated voltage (III/2) | 1000 V |
| Rated voltage (III/3) | 1000 V |
| Solder pin length [P] | 4.1 mm |
| Test duration per axis | 2.5 h |
| Surface characteristics | Tin-plated |
| Insulating material group | I |
| Solder pins per potential | 6 |
| CTI according to IEC 60112 | 600 |
| Rated surge voltage (II/2) | 6 kV |
| Conductor cross section AWG | 20 ... 4 |
| Rated surge voltage (III/2) | 8 kV |
| Rated surge voltage (III/3) | 8 kV |
| Conductor cross section rigid | 0.75 mm² ... 16 mm² (Conductor connection with open terminal point) |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 1000 V |
| Conductor cross section flexible | 0.75 mm² ... 16 mm² |
| Rated insulation voltage (III/2) | 1000 V |
| Rated insulation voltage (III/3) | 1000 V |
| minimum creepage distance (II/2) | 5.5 mm |
| Requirement temperature-rise test | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. |
| minimum creepage distance (III/2) | 8 mm |
| minimum creepage distance (III/3) | 12.5 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Metal surface soldering area (top layer) | Tin (10 - 16 µm Sn) |
| Metal surface terminal point (top layer) | Tin (10 - 16 µm Sn) |
| Insulation resistance, neighboring positions | > 5 MΩ |
| minimum clearance value - non-homogenous field (II/2) | 5.5 mm |
| minimum clearance value - non-homogenous field (III/2) | 8 mm |
| minimum clearance value - non-homogenous field (III/3) | 8 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.75 mm² ... 10 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.75 mm² ... 16 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.75 mm² / solid / > 30 N |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.75 mm² ... 4 mm² |
Product Description
Terminal for printed circuit board, nominal current: 76 A, nominal voltage (III/2): 1000 V, nominal section: 16 mm², number of potentials: 1, number of rows: 1, number of poles per row: 1, family of a
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
