In Stock Hot Product
SMKDS 3/ 6 BK
SMKDS 3/ 6 BK 1801029 PHOENIX CONTACT Terminal for printed circuit board, rated voltage: 400 V, pitch: 5 mm,..
$0.00USD
4473 in stock
Key Specifications
Note:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Type:PC terminal block can be aligned
Pitch:5 mm
Width [w]:30 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Type | PC terminal block can be aligned |
| Pitch | 5 mm |
| Width [w] | 30 mm |
| Height [h] | 22.5 mm |
| Length [l] | 16 mm |
| Pin layout | Linear pinning |
| Product line | COMBICON Terminals M |
| Product type | Printed circuit board terminal |
| Hole diameter | 1.3 mm |
| Mounting type | Wave soldering |
| Specification | IEC 60664-1:2007-04 |
| Number of rows | 1 |
| Pin dimensions | 0.9 x 0.9 mm |
| Product family | SMKDS 3 |
| Color (Housing) | black (9005) |
| Article revision | 00 |
| Contact material | Cu alloy |
| Installed height | 18 mm |
| Stripping length | 8 mm |
| Connection method | Screw connection with tension sleeve |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Type of packaging | packed in cardboard |
| Nominal current IN | 24 A |
| Nominal voltage UN | 400 V |
| Dimensional drawing | |
| Insulating material | PA |
| Note on application | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| Number of positions | 6 |
| Number of potentials | 6 |
| Rated voltage (II/2) | 630 V |
| Drive form screw head | Slotted (L) |
| Nominal cross section | 2.5 mm² |
| Number of connections | 6 |
| Rated voltage (III/2) | 400 V |
| Rated voltage (III/3) | 250 V |
| Solder pin length [P] | 4.5 mm |
| Surface characteristics | hot-dip tin-plated |
| Insulating material group | I |
| Solder pins per potential | 1 |
| CTI according to IEC 60112 | 600 |
| Rated surge voltage (II/2) | 4 kV |
| Conductor cross section AWG | 24 ... 12 |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (III/3) | 4 kV |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 630 V |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Rated insulation voltage (III/2) | 400 V |
| Rated insulation voltage (III/3) | 250 V |
| minimum creepage distance (II/2) | 3.2 mm |
| minimum creepage distance (III/2) | 3 mm |
| minimum creepage distance (III/3) | 3.2 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Metal surface soldering area (top layer) | Tin (4 - 8 µm Sn) |
| Metal surface terminal point (top layer) | Tin (4 - 8 µm Sn) |
| 2 conductors with same cross section, solid | 0.2 mm² ... 1.5 mm² |
| 2 conductors with same cross section, flexible | 0.2 mm² ... 1.5 mm² |
| minimum clearance value - non-homogenous field (II/2) | 3 mm |
| minimum clearance value - non-homogenous field (III/2) | 3 mm |
| minimum clearance value - non-homogenous field (III/3) | 3 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.75 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1.5 mm² |
Product Description
Terminal block for printed circuit board, rated current: 24 A, rated voltage (III/2): 400 V, rated cross-section: 2.5 mm², number of potentials: 6, number of rows: 1, number of poles per row: 6, item
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
