

| Parameter | Value |
|---|---|
| • WARNING: Serve only products in perfect condition. Products should be checked regularly for damage. Remove defective products immediately. Replace damaged products. It is not possible to repair them. | |
| Series | SM |
| General | Crimped contacts 4 x Ø 2 mm, 4 x Ø 3.6 mm must be ordered separately |
| Altitude | 3000 m |
| Shielded | Yes |
| assembly | 4x Ø4,2 |
| Plug Face | 4+3+PE |
| Thread Type | M40 |
| application | Power |
| Codification | N |
| Construction | straight |
| Product Type | Circular connectors (equipment side) |
| Safety Notes | WARNING: Connectors should not be plugged in or unplugged under load. Failure to comply and improper use can result in property damage and personal injury. |
| Surge Category | Iii |
| Connection type | Crimp connection |
| Gasket material | FPM |
| Maximum Current | 70 A |
| Number of poles | 8 |
| Contact Diameter | 3.6 mm |
| Housing Material | Rotating Parts: Copper-Zinc Alloy (CuZn), Pressed Castings: Zinc (GD-Zn) |
| Protection Index | IP67 |
| Flange Measurement | 40 mm x 40 mm |
| Nominal voltage UN | 630 V |
| Degree of pollution | 3 |
| Header construction | Female Connection |
| Insulation material | AP 6.6 |
| Contact Connection Type | Female |
| Ambient Temperature (Service) | -40 °C ... 125 °C |
| Dimensioning Transient Voltage | 6 kV |
| Material of sealing ring and O-ring | FPM |
Technical specifications and performance data
Installation and operation guide