

| Parameter | Value |
|---|---|
| 65 mA (maximum) | |
| Load | 10 kΩ |
| Note | When being exposed to interference, there may be minimal deviations. |
| Depth | 128.5 mm |
| Width | 22.5 mm |
| Height | 102 mm |
| Altitude | ≤ 2000 m |
| Cable type | Twisted, shielded |
| Certificate | CE-compliant |
| Impulse form | DC voltage |
| Product type | Voltage transducer |
| Mounting type | DIN rail: 35 mm |
| Identification | 508 Listed |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 |
| Product family | SOLARCHECK |
| Article revision | 07 |
| Number of inputs | 1 |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Protective circuit | Surge protection; 33 V suppressor diode |
| Input voltage range | 0 V DC ... 1500 V DC (CAT III) |
| Degree of protection | IP20 |
| Supply voltage range | 21.6 V DC ... 30 V DC |
| Low Voltage Directive | Conformance with Low Voltage Directive |
| Standards/regulations | EN 61010-1 |
| Voltage output signal | 2 V DC ... 10 V DC |
| Nominal supply voltage | 24 V DC -10 % ... +25 % (or via SSCK-M-I-8S-20A) |
| Own current consumption | 8 mA (typical) |
| Maximum transmission error | ± 1 % (after additional tuning (valid for 100 - 1,500 V DC)) |
| Conductor cross section AWG | 24 ... 12 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Electromagnetic compatibility | Conformance with EMC directive |
| Ambient temperature (operation) | -20 °C ... 70 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Permissible humidity (operation) | ≤ 95 % (non-condensing) |
| Temperature coefficient, typical | < 0.01 %/K |
| Input resistance of voltage input | 2x 20 MΩ |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Technical specifications and performance data
Installation and operation guide