SACC-VB-3CON-M12/CI-1L-SV 110V

Parameter	Value
	110 V DC
Width	16 mm
Height	27.5 mm
Length	26.8 mm
Shielded	no
Head design	Valve connector
Sensor type	Universal
Product type	Valve connectors
Assembly note	NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Fixing screws	M3 x 27
Seal material	NBR
Status display	LED (yellow)
Article revision	02
Contact material	CuZn
Head thread type	CI (9.4 mm)
Outside diameter	4 mm ... 6 mm
Connection method	Screw connection
Tightening torque	1.6 Nm ±0.2 Nm (Pressure screw)
Contact resistance	≤ 4 mΩ
Nominal current IN	1.5 A
Nominal voltage UN	110 V AC
Protective circuit	Surge protection; Varistor
Degree of pollution	3
Dimensional drawing
Number of positions	3
Pg screw connection	M12
Degree of protection	IP65
No. of cable outlets	1
Overvoltage category	II
Insulation resistance	> 2 GΩ
Status display present	Yes
Conductor cross section	0.25 mm² ... 0.5 mm²
Contact surface material	CuSn
Insertion/withdrawal cycles	50 (Valve connector)
Material housing valve plug	PA
Connection cross section AWG	24 ... 20
Ambient temperature (operation)	-25 °C ... 60 °C (valve plug)
Flammability rating according to UL 94	HB

Valve Connector, Universal, 3-Pole, IC Valve Connector (9.4mm), Screw Connection, M12 Cable Gland, Cable Outer Diameter 4 mm ... 6 mm

Technical specifications and performance data

Installation and operation guide

SACC-VB-3CON-M12/CI-1L-SV 110V 1452301 PHOENIX CONTACT Valve connectors