SACC-V-4CON-PG7/CI

Parameter	Value
	250 V DC
Shielded	no
Head design	Valve connector
Sensor type	Universal
Product type	Valve connectors
Assembly note	NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Seal material	NBR
Status display	no
Contact material	CuSn
Head thread type	CI (9.4 mm)
Outside diameter	4 mm ... 6 mm
Connection method	Screw connection
Contact resistance	≤ 15 mΩ
Nominal current IN	10 A
Nominal voltage UN	250 V AC
Protective circuit	unwired
Degree of pollution	3
Number of positions	4
Pg screw connection	Pg9
Degree of protection	IP65
No. of cable outlets	1
Overvoltage category	II
Insulation resistance	≥ 100 MΩ
Status display present	No
Conductor cross section	0.34 mm² ... 1.5 mm²
Contact surface material	Ni
Insertion/withdrawal cycles	50 (Valve connector)
Material housing valve plug	PA 6
Connection cross section AWG	22 ... 16
Ambient temperature (operation)	-30 °C ... 100 °C (Connector)
Valve plug contact insert material	PA 6
Flammability rating according to UL 94	HB

Valve Connector, Universal, 4-Pole, IC Valve Connector (9.4mm), Screw Connection, Pg9 Gland, Cable Outer Diameter 4mm... 6 mm

Technical specifications and performance data

Installation and operation guide

SACC-V-4CON-PG7/CI 1527977 PHOENIX CONTACT Valve connectors