In Stock Hot Product
SACC-PO12MR-8CT-CM SH
SACC-PO12MR-8CT-CM SH 1319945 PHOENIX CONTACT Connector, Universal, 8-pole, shielded, M12 angled male connec..
$37.97USD
295 in stock
Key Specifications
:4 Nm (Pressure nut with coupling sleeve)
Note:In line with
Coding:A
Length:53 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 4 Nm (Pressure nut with coupling sleeve) | |
| Note | In line with |
| Coding | A |
| Length | 53 mm |
| General | NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| Shielded | yes |
| Head design | Plug |
| Sensor type | Universal |
| Cable outlet | angled |
| Product type | Circular connector (cable-side) |
| Seal material | NBR |
| Diameter housing | 22 mm |
| Head thread type | M12 |
| Outside diameter | 4.5 mm ... 7.5 mm |
| Connection method | Crimp connection |
| Head cable outlet | angled |
| Head locking type | Push-Pull |
| Tightening torque | 1.5 Nm (Screw plug insert with sleeve housing as far it will go) |
| Nominal current IN | 2 A |
| Nominal voltage UN | 30 V AC |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 8 |
| Rated surge voltage | 0.8 kV |
| Degree of protection | IP65 |
| No. of cable outlets | 1 |
| Overvoltage category | II |
| Signal type/category | Universal |
| Standard designation | M12 connector |
| Assembly instructions | Contacts can be clipped in place and unclipped without tools |
| Insulation resistance | ≥ 100 MΩ |
| Material of grip body | Zinc die-cast, nickel-plated |
| Wrench size, union nut | 15 mm |
| Connection cross section | 0.14 mm² ... 0.34 mm² (flexible) |
| Standards/specifications | IEC 61076-2-101 |
| Wrench size, counter nut | 14 mm |
| Insertion/withdrawal cycles | ≥ 100 |
| Connection cross section AWG | 26 ... 22 (flexible) |
| Material for screw connection | PA 6.6 |
| Ambient temperature (operation) | -40 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
| Stripping length of the individual wire | 4 mm +0,5 mm |
Product Description
Connector, Universal, 8-pole, shielded, M12 Push-Pull Elbowed Male Connector, A-Coded, Crimped Connection, Knurling Material: PA 6.6, Cable Outer Diameter 4.5 mm ... 7.5 mm, no crimped contacts
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
