In Stock Hot Product
SACC-MINMR-3CON-PG 9
SACC-MINMR-3CON-PG 9 1521465 PHOENIX CONTACT Connector
$28.37USD
393 in stock
Key Specifications
:The connector pin assignment can be rotated 45° to the cable outlet
Coding:A
Length:65.5 mm
Shielded:no
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| The connector pin assignment can be rotated 45° to the cable outlet | |
| Coding | A |
| Length | 65.5 mm |
| Shielded | no |
| Head design | Plug |
| Sensor type | Universal |
| Cable outlet | angled |
| Product type | Circular connector (cable-side) |
| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Article revision | 04 |
| Contact material | CuZn |
| Diameter housing | 28 mm |
| Head thread type | 7/8"-16UNF |
| Outside diameter | 6 mm ... 8 mm |
| Connection method | Screw connection |
| Head cable outlet | angled |
| Tightening torque | 0.8 Nm (7/8" connectors) |
| Contact resistance | ≤ 5 mΩ |
| Nominal current IN | 12 A |
| Nominal voltage UN | 300 V AC |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 3 |
| Pg screw connection | Pg9 |
| Rated surge voltage | 4 kV |
| Degree of protection | IP67 |
| No. of cable outlets | 1 |
| Overvoltage category | III |
| Signal type/category | Universal |
| Insulation resistance | ≥ 100 MΩ |
| Material of grip body | PBT |
| Connection cross section | 0.34 mm² ... 1.5 mm² (without ferrule) |
| Contact carrier material | PUR/PA 6.6 |
| Contact surface material | Au |
| Insertion/withdrawal cycles | ≥ 100 |
| Connection cross section AWG | 22 ... 16 (without ferrule) |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | HB |
| Stripping length of the individual wire | 7 mm |
Product Description
Connector, Universal, 3-pole, Angled male connector 7/8"-16UNF, coded A, Screw connection, knurling material: Zinc die-cast, nickel-plated, Pg9 cable gland, cable outer diameter 6 mm ... 8 mm, Contact
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
