In Stock Hot Product
SACC-MCI-M12MS-4CON
SACC-MCI-M12MS-4CON 1440931 PHOENIX CONTACT Contact carriers
$2.63USD
3845 in stock
Key Specifications
:• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Coding:A
Shielded:no
Head design:Pin
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Coding | A |
| Shielded | no |
| Head design | Pin |
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Thread type | M12 |
| Seal present | no |
| Assembly note | 25 mm side length |
| Mounting type | Front mounting Square flange 25 mm side length |
| Status display | no |
| Article revision | 02 |
| Head thread type | M12 |
| Connection method | Crimp connection |
| Head cable outlet | straight |
| Contact resistance | ≤ 3 mΩ |
| Nominal current IN | 4 A |
| Nominal voltage UN | 250 V |
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Cable cross section | 0.34 mm² |
| Degree of pollution | 3 |
| Number of positions | 4 |
| Rated surge voltage | 2.5 kV |
| Degree of protection | IP67 |
| No. of cable outlets | 1 |
| Overvoltage category | II |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| Status display present | No |
| Contact carrier material | PA 6.6 |
| Standards/specifications | IEC 61076-2-101 |
| Insertion/withdrawal cycles | > 100 |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
Product Description
Contact support, 4-pole, Male connector, straight, M12, coding: A, Front mounting, Square flange, Crimp connection, 0.34 mm²
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
