

| Parameter | Value |
|---|---|
| 4 Nm (Tightening Nut) | |
| General | IMPORTANT:When laying cables, respect the permissible bending radii, as excessive bending forces can impair the protection index. Relieve mechanical loads upstream of the connector (e.g. by means of cable ties). |
| Shielded | No |
| Longitude | 60 mm |
| Plug Cycles | ≥ 100 |
| Sensor Type | Universal |
| Cable outlet | straight |
| Codification | to |
| Product Type | Circular connector (cable side) |
| Case Diameter | 20 mm |
| Outer diameter | 4 mm ... 7 mm |
| Surge Category | Ii |
| Connection type | Scroll connection. Isolation |
| Gasket material | FKM |
| Number of poles | 5 |
| Contact material | CuSn |
| Dimension Scheme | |
| Protection Index | IP65 |
| Rules/Provisions | in accordance with IEC 61076-2-101 |
| Tightening torque | 0.4 Nm (M12 knurling) |
| Connection Section | 0.14 mm² ... 0.5 mm² (flexible) |
| Grip body material | PA-GF |
| Header thread type | M12 |
| Nominal Current IN | 4 A |
| Nominal voltage UN | 48 V AC |
| Degree of pollution | 3 |
| Header cable outlet | straight |
| Header construction | Male connector |
| Signal Type/Category | Universal |
| Insulation resistance | ≥ 100 MΩ |
| AWG Connection Section | 26 ... 20 (flexible) |
| Number of Cable Outlets | 1 |
| Contact Support Material | AP 6.6 |
| Denomination of standard | M12 plug-in connector |
| Insulation of conductors | PVC / PE / PP / Rubber |
| Material: Contact Surface | Ni/AU |
| Screw connection material | Stainless steel 1.4404 |
| Ambient Temperature (Service) | -40 °C ... 85°C (male/female) |
| Width Between Faces - Locknut | 15 mm |
| Ambient Temperature (Mounting) | -5 °C ... 50 °C (in the garment) |
| Dimensioning Transient Voltage | 0.8 kV |
| Width Between Faces - Union Nut | 16 mm |
| Flammability class according to UL 94 | V0 |
| Contact | Color (Signal Denomination) | Contact (optional) | 1 = BN |
Technical specifications and performance data
Installation and operation guide