In Stock Hot Product
SACC-M12MS-5CT-CM SH
SACC-M12MS-5CT-CM SH 1422850 PHOENIX CONTACT Connector
$0.00USD
3997 in stock
Key Specifications
:4 Nm (Pressure nut with coupling sleeve)
Coding:A
Length:43 mm
Shielded:yes
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 4 Nm (Pressure nut with coupling sleeve) | |
| Coding | A |
| Length | 43 mm |
| Shielded | yes |
| Head design | Plug |
| Sensor type | Universal |
| Cable outlet | straight |
| Product type | Circular connector (cable-side) |
| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Seal material | FKM |
| Article revision | 04 |
| Diameter housing | 16 mm |
| Head thread type | M12 |
| Outside diameter | 4.5 mm ... 7.5 mm |
| Connection method | Crimp connection |
| Head cable outlet | straight |
| Tightening torque | 0.4 Nm (M12 knurl) |
| Nominal current IN | 4 A |
| Nominal voltage UN | 48 V AC |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 5 |
| Rated surge voltage | 1.5 kV |
| Degree of protection | IP65 |
| No. of cable outlets | 1 |
| Overvoltage category | III |
| Signal type/category | Universal |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| Material of grip body | Zinc die-cast, nickel-plated |
| Standards/regulations | PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Wrench size, union nut | 15 mm |
| Connection cross section | 0.14 mm² ... 1 mm² (flexible) |
| Contact carrier material | PA 6.6 |
| Standards/specifications | IEC 61076-2-101 |
| Wrench size, counter nut | 14 mm |
| Insertion/withdrawal cycles | ≥ 100 |
| Connection cross section AWG | 26 ... 18 (flexible) |
| Material for screw connection | Zinc die-cast, tin-plated |
| Ambient temperature (operation) | -40 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
| Stripping length of the individual wire | 4 mm +0,5 mm |
| Contact Color (signal designation) Contact (optional) | 1 = BN |
Product Description
Connector, Universal, 5-pole, shielded, M12 straight male connector, A-coded, crimped connection, knurling material: Zinc die-cast, tin-plated, cable outer diameter 4.5 mm ... 7.5 mm, no crimped conta
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
