In Stock Hot Product
SACC-M12MRB-5PL SH IB
SACC-M12MRB-5PL SH IB 1424675 PHOENIX CONTACT Bus system connector
$0.00USD
4129 in stock
Key Specifications
:The wires can be connected both with ferrules and without ferrules
Coding:B
Length:50 mm
Material:TPE-U (Clamping cage, weight: 1.1 g)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| The wires can be connected both with ferrules and without ferrules | |
| Coding | B |
| Length | 50 mm |
| Material | TPE-U (Clamping cage, weight: 1.1 g) |
| Shielded | yes |
| Application | Data |
| Head design | Plug |
| Sensor type | INTERBUS |
| Cable outlet | angled |
| Product type | Circular connector (cable-side) |
| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Seal material | NBR |
| Article revision | 04 |
| Contact material | CuSn |
| Diameter housing | 19 mm |
| Head thread type | M12 |
| Outside diameter | 4 mm ... 8 mm |
| Connection method | Push-lock spring connection |
| Head cable outlet | angled |
| Tightening torque | 0.4 Nm (M12 knurl) |
| Contact resistance | ≤ 5 mΩ |
| Nominal current IN | 4 A (2 A when using 0.14 mm² conductors) |
| Nominal voltage UN | 48 V AC |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 5 |
| Rated surge voltage | 1.5 kV |
| Degree of protection | IP65 |
| No. of cable outlets | 1 |
| Overvoltage category | II |
| Signal type/category | INTERBUS, 500 kbps |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| Material of grip body | Zinc die-cast, nickel-plated |
| Standards/regulations | PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Connection cross section | 0.14 mm² ... 0.75 mm² (without ferrule) |
| Contact carrier material | PA 6.6 |
| Contact surface material | Ni/Au |
| Standards/specifications | IEC 61076-2-101 |
| Insertion/withdrawal cycles | ≥ 100 |
| Connection cross section AWG | 26 ... 18 (without ferrule) |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Ambient temperature (operation) | -40 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
| Stripping length of the individual wire | 7 mm |
| Contact Color (signal designation) Contact (optional) | 1 = YE |
Product Description
Data connectors, INTERBUS (500 kBit/s), 5-pole, shielded, Angled male connector M12, B, Spring connection push lock, knurling material: Zinc die-cast, nickel-plated, cable outer diameter 4 mm ... 8 mm
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
