

| Parameter | Value |
|---|---|
| FKM | |
| Coding | A |
| Length | 58 mm |
| General | NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| Shielded | no |
| Head design | Socket |
| Sensor type | Universal |
| Cable outlet | straight |
| Product type | Circular connector (cable-side) |
| Seal material | FKM |
| Contact material | CuSn |
| Diameter housing | 20 mm |
| Head thread type | M12 |
| Outside diameter | 4 mm ... 7 mm |
| Connection method | Insulation displacement connection |
| Head cable outlet | straight |
| Tightening torque | 0.4 Nm (M12 knurl) |
| Nominal current IN | 4 A |
| Nominal voltage UN | 48 V AC |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 5 |
| Rated surge voltage | 0.8 kV |
| Degree of protection | IP65 |
| No. of cable outlets | 1 |
| Overvoltage category | II |
| Signal type/category | Universal |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| Material of grip body | PA-GF |
| Wrench size, union nut | 16 mm |
| Connection cross section | 0.14 mm² ... 0.5 mm² (flexible) |
| Contact carrier material | PA 6.6 |
| Contact surface material | Ni/Au |
| Standards/specifications | according to IEC 61076-2-101 |
| Wire insulation material | PVC / PE / PP / rubber |
| Wrench size, counter nut | 15 mm |
| Insertion/withdrawal cycles | ≥ 100 |
| Connection cross section AWG | 26 ... 20 (flexible) |
| Material for screw connection | Stainless steel 1.4404 |
| Ambient temperature (assembly) | -5 °C ... 50 °C (During assembly) |
| Ambient temperature (operation) | -40 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
| Contact | Color (signal designation) | Contact (optional) | 1 = BN |
Technical specifications and performance data
Installation and operation guide