In Stock Hot Product
SACC-M12FR-5CON-PG11-M PWR
SACC-M12FR-5CON-PG11-M PWR 1408993 PHOENIX CONTACT Power connectors
$0.00USD
3390 in stock
Key Specifications
:NBR
Coding:A
Length:39 mm
General:Strip 22 mm off the cable sheath, shorten conductor for the fifth position by 10 mm. Strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductors with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm.
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| NBR | |
| Coding | A |
| Length | 39 mm |
| General | Strip 22 mm off the cable sheath, shorten conductor for the fifth position by 10 mm. Strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductors with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. |
| Shielded | no |
| Application | Power supply |
| Head design | Socket |
| Cable outlet | angled |
| Product type | Circular connector (cable-side) |
| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Seal material | Viton |
| Article revision | 00 |
| Contact material | CuZn |
| Diameter housing | 20.2 mm |
| Head thread type | M12 |
| Outside diameter | 8 mm ... 10 mm |
| Connection method | Screw connection |
| Head cable outlet | angled |
| Tightening torque | 0.4 Nm (M12 knurl) |
| Contact resistance | ≤ 3 mΩ |
| Nominal current IN | 8 A (Contact 5: 2 A) |
| Nominal voltage UN | 48 V AC |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 5 |
| Pg screw connection | Pg11 |
| Rated surge voltage | 0.8 kV |
| Degree of protection | IP67 |
| No. of cable outlets | 1 |
| Overvoltage category | II |
| Standard designation | M12 connector |
| Insulation resistance | > 10 GΩ |
| Material of grip body | PA |
| Connection cross section | 0.75 mm² ... 1.5 mm² (without ferrule) |
| Contact carrier material | PA |
| Contact surface material | Ni/Au |
| Standards/specifications | IEC 61076-2-101 |
| Insertion/withdrawal cycles | > 100 |
| Connection cross section AWG | 18 ... 16 (without ferrule) |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Ambient temperature (operation) | -40 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
| Stripping length of the individual wire | 5 mm |
Product Description
Power connector, 5-pole, Elbow connection female M12, coded A, Screw connection, knurling material: Zinc die-cast, nickel-plated, Pg11 cable gland, cable outer diameter 8 mm ... 10 mm
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
