SACC-E-M5FS-4CON-M5/0,5

Parameter	Value
	60 V DC
Coding	A
Shielded	no
Cable type	TPE litz wire
Head design	Socket
Thread type	M5
Cable length	0.5 m
Product type	Circular connectors (device side)
Test voltage	800 V
Mounting type	Front mounting M5 x 0.5
Seal material	Viton
AWG signal line	26
Article revision	01
Contact material	CuSn
Head thread type	M5
Connection method	Individual wires
Head cable outlet	straight
Contact resistance	≤ 3 mΩ
Nominal current IN	1 A
Nominal voltage UN	48 V AC
Single wire, color	brown, white, blue, black
Cable cross section	0.14 mm²
Degree of pollution	3
Number of positions	4
Degree of protection	IP67
No. of cable outlets	1
Overvoltage category	II
Standard designation	M5 connector
Insulation resistance	≥ 100 MΩ
Conductor cross section	0.14 mm²
Contact connection type	Socket
Contact carrier material	PA 6.6
Contact surface material	Au
Material wire insulation	TPE
Standards/specifications	IEC 61076-2-105
Material for screw connection	Brass, nickel-plated
Ambient temperature (operation)	-25 °C ... 80 °C (cable, fixed installation)
Conductor structure signal line	18x 0.10 mm
Flammability rating according to UL 94	HB

Sensor/actuator mount female, 4-pole, M5, front wall mount/bolt mount, with M5 thread, with 0.5 m TPE conductor, 4x0.14mm²

Technical specifications and performance data

Installation and operation guide

SACC-E-M5FS-4CON-M5/0,5 1530618 PHOENIX CONTACT Flush-type connector