Service time: Monday to Friday 9:00-18:00
SACC-E-M12MSS-3P-M16/0,5 PEX - SACC-E-M12MSS-3P-M16/0,5 PEX 1238909 PHOENIX CONTACT Conect. plug. to be apar. front wall, Power, 3-pole, Ma..
In Stock Hot Product

SACC-E-M12MSS-3P-M16/0,5 PEX

SACC-E-M12MSS-3P-M16/0,5 PEX 1238909 PHOENIX CONTACT Conect. plug. to be apar. front wall, Power, 3-pole, Ma..

$0.00USD
4631 in stock
Key Specifications
:• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Note:In line with
Coding:S
General:The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support

Technical Specifications

ParameterValue
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
NoteIn line with
CodingS
GeneralThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Shieldedno
Cable typeUL/cUL stranded hook-up wire
Head designPin
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Sensor typePower
Thread typeM12
Cable length0.5 m
Halogen-freeyes
Product typeCircular connectors (device side)
Test voltage6 kV
Mounting typeFront mounting M16 x 1.5
Seal materialFKM
AWG signal line16
Contact materialCuZn
Flame resistancein acc. to UL 1581 VW1
Head thread typeM12
Connection methodIndividual wires
Head cable outletstraight
Head locking typeStandard
Tightening torque3 Nm
Conductor materialBare Cu litz wires
Contact resistance≤ 3 mΩ
Nominal current IN16 A
Nominal voltage UN630 V
Single wire, colorblack 1, black 2, green/yellow
Cable cross section1.31 mm²
Degree of pollution3
Number of positions3
Rated surge voltage6 kV
Degree of protectionIP67
No. of cable outlets1
Overvoltage categoryIII
Signal type/categoryPower
Standard designationM12 connector
Insulation resistance≥ 100 MΩ
Conductor cross section1.31 mm²
Contact connection typePin
Contact carrier materialPA
Contact surface materialNi/Au
Material wire insulationmPPE
Standards/specificationsIEC 61076-2-111
Insertion/withdrawal cycles> 100
Material for screw connectionCuZn alloy, nickel-plated
Wire diameter incl. insulation2.2 mm
Ambient temperature (operation)-40 °C ... 85 °C (without mechanical actuation)
Flammability rating according to UL 94V0
Rated voltage in acc. with IEC 61076-2-101630 V

Product Description

Device connector front mounting, Power, 3-position, Pin,straight, M12-Standard, coding: S, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m,1.31 mm2,UL/cUL stranded
Key Features
  • Industrial grade quality
  • RoHS compliant
  • CE certified
  • 1-year warranty

Product Documents

Datasheet

Technical specifications and performance data

User Manual

Installation and operation guide

Top