In Stock Hot Product
SACC-E-M12MS-3P-M20/0,5/0,15VA
SACC-E-M12MS-3P-M20/0,5/0,15VA 1413927 PHOENIX CONTACT Sensor/actuator panel-mount connector, 3-pos., M12, A..
$0.00USD
4480 in stock
Key Specifications
:• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Coding:A
Cable type:PVC litz wire
Head design:Pin
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Coding | A |
| Cable type | PVC litz wire |
| Head design | Pin |
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Thread type | M12 |
| Cable length | 0.15 m |
| Product type | Circular connectors (device side) |
| Mounting type | Front mounting M20 x 1,5 |
| Seal material | HNBR |
| AWG signal line | 20 |
| Contact material | CuZn |
| Head thread type | M12 |
| Connection method | Individual wires |
| Conductor material | Tin-plated Cu litz wires |
| Contact resistance | ≤ 3 mΩ |
| Nominal current IN | 4 A |
| Nominal voltage UN | 250 V |
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Single wire, color | brown, blue, black |
| Cable cross section | 0.5 mm² |
| Degree of pollution | 3 |
| Number of positions | 3 |
| Rated surge voltage | 2.5 kV |
| Test voltage, cable | 2000 V AC |
| Degree of protection | IP65/IP67/IP69/IP69K |
| No. of cable outlets | 1 |
| Overvoltage category | II |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage, cable | 300 V |
| Conductor cross section | 0.5 mm² |
| Contact connection type | Pin |
| Contact carrier material | PA 6.6 |
| Contact surface material | Au |
| Material wire insulation | TPE |
| Standards/specifications | according to IEC 61076-2-101 |
| Insertion/withdrawal cycles | > 100 |
| Material for screw connection | Stainless steel |
| Wire diameter incl. insulation | 2.5 mm |
| Ambient temperature (operation) | -40 °C ... 70 °C (cable, fixed installation) |
| Flammability rating according to UL 94 | V0 |
Product Description
Conect. plug. to be apar. front wall, 3-pole, Male connector, M12, coding: A, Front mounting, Single stranded wires, cable length: 0.15 m, 0.50 mm², PVC conductor
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
