In Stock Hot Product
SACC-DSIV-M12FSB-5CON-L180 SH
SACC-DSIV-M12FSB-5CON-L180 SH 1437180 PHOENIX CONTACT Flush-type connector
$10.69USD
983 in stock
Key Specifications
:-25 °C ... 85 °C (Cable, flexible installation)
Coding:B
Shielded:yes
Head design:Socket
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| -25 °C ... 85 °C (Cable, flexible installation) | |
| Coding | B |
| Shielded | yes |
| Head design | Socket |
| Thread type | M12 |
| Product type | Circular connectors (device side) |
| Assembly note | With locking nut |
| Mounting type | Rear mounting M12 x 1 With locking nut |
| Seal material | NBR |
| Article revision | 02 |
| Contact material | CuZn |
| Head thread type | M12 |
| Connection method | Solder pins |
| Head cable outlet | straight |
| Tightening torque | 1 Nm ... 1.5 Nm (Installation-side) |
| Contact resistance | ≤ 3 mΩ |
| Nominal current IN | 4 A |
| Nominal voltage UN | 60 V |
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Degree of pollution | 3 |
| Number of positions | 5 |
| Rated surge voltage | 1.5 kV |
| Degree of protection | IP67 |
| Overvoltage category | II |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| Contact connection type | Socket |
| Contact carrier material | PA 6.6 |
| Contact surface material | Ni/Au |
| Standards/specifications | IEC 61076-2-101 |
| Insertion/withdrawal cycles | > 100 |
| Material for screw connection | Brass, nickel-plated |
| Ambient temperature (operation) | -40 °C ... 85 °C (cable, fixed installation) |
| Flammability rating according to UL 94 | HB |
Product Description
Built-in mount plug-in connector for sensors/actuators, female connector, 5-pole, M12, shielded, B-coded, backwall mounting/screw-on mounting with M12 thread, twist-protected, with straight weld conne
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
