In Stock Hot Product
SACC-DSI-MSD-4CON-L180/SH TQX
SACC-DSI-MSD-4CON-L180/SH TQX 1239816 PHOENIX CONTACT Connect. plug. for apar. poster wall, CAT5 Ethernet (1..
$14.29USD
745 in stock
Key Specifications
:6 mm
Coding:D
General:The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Shielded:yes
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 6 mm | |
| Coding | D |
| General | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Shielded | yes |
| Application | Data |
| Head design | Pin |
| Sensor type | Ethernet |
| Thread type | M12 |
| Product type | Circular connectors (device side) |
| Mounting type | Rear mounting M16 x 1.5 With flat nut |
| Seal material | NBR |
| Contact material | CuZn |
| Head thread type | M12 |
| Connection method | Wave soldering |
| Head cable outlet | straight |
| Head locking type | SPEEDCON |
| Tightening torque | 3 Nm |
| Contact resistance | ≤ 3 mΩ |
| Nominal current IN | 4 A |
| Nominal voltage UN | 48 V AC |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 4 |
| Rated surge voltage | 2.5 kV |
| Degree of protection | IP67 (When plugged in) |
| Overvoltage category | II |
| Signal type/category | Ethernet CAT5, 100 Mbps |
| Standard designation | M12 connector |
| Assembly instructions | With flat nut |
| Insulation resistance | ≥ 100 MΩ |
| Contact connection type | Pin |
| Contact carrier material | PA 6.6 |
| Contact surface material | Ni/Au |
| Length of the solder pin | 6 mm |
| Standards/specifications | IEC 61076-2-101 |
| Insertion/withdrawal cycles | ≥ 100 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Wire diameter incl. insulation | 1 mm |
| Ambient temperature (operation) | -40 °C ... 70 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
| Transmission characteristics (category) | CAT5 (IEC 11801:2002) |
Product Description
Device connector, rear mounting, Ethernet CAT5 (100 Mbps), 4-position, Pin,straight, M12-SPEEDCON, coding: D, Rear mounting, M16 x 1.5, Wave soldering,Item is lead-free in accordance with RoHS II with
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
