

| Parameter | Value |
|---|---|
| IP65/IP67 | |
| Note | In line with |
| Coding | L |
| General | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Head design | Pin |
| Sensor type | Power |
| Thread type | M12 |
| Product type | Circular connectors (device side) |
| Mounting type | Rear mounting M16 x 1.5 With flat nut |
| Seal material | FKM |
| Contact material | CuZn |
| Head thread type | M12 |
| Connection method | Solder pins |
| Head cable outlet | straight |
| Nominal current IN | 16 A |
| Nominal voltage UN | 63 V DC |
| Degree of pollution | 3 |
| Number of positions | 5 |
| Rated surge voltage | 1.5 kV |
| Degree of protection | IP67 |
| Overvoltage category | III |
| Signal type/category | Power |
| Standard designation | M12 connector |
| Assembly instructions | With flat nut |
| Contact connection type | Pin |
| Contact carrier material | PA |
| Contact surface material | Au |
| Standards/specifications | IEC 61076-2-111 |
| Insertion/withdrawal cycles | > 100 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
Technical specifications and performance data
Installation and operation guide