In Stock Hot Product
SACC-DSI-M12MSL-4CON-M16XL/1,5X
SACC-DSI-M12MSL-4CON-M16XL/1,5X 1238565 PHOENIX CONTACT Connect. plug. for apar. poster wall, Power, 4-pole,..
$34.78USD
327 in stock
Key Specifications
:1.5 kV AC/DC
Note:In line with
Coding:L
General:The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 1.5 kV AC/DC | |
| Note | In line with |
| Coding | L |
| General | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Shielded | no |
| Cable type | PEX litz wire |
| Head design | Pin |
| Sensor type | Power |
| Thread type | M12 |
| Cable length | 1.5 m |
| Halogen-free | according to IEC 60754-1 |
| Product type | Circular connectors (device side) |
| Test voltage | 1.5 kV |
| Mounting type | Rear mounting M16 x 1.5 Tightening limitation |
| Seal material | FKM |
| AWG signal line | 14 |
| Contact material | CuZn |
| Flame resistance | in acc. with UL FT-2 |
| Head thread type | M12 |
| Connection method | Individual wires |
| Head cable outlet | straight |
| Conductor material | Tin-plated Cu litz wires |
| Nominal current IN | 16 A |
| Nominal voltage UN | 63 V |
| Single wire, color | brown 1, white 2, blue 3, black 4 |
| Cable cross section | 2.5 mm² |
| Degree of pollution | 3 |
| Number of positions | 4 |
| Rated surge voltage | 1.5 kV |
| Degree of protection | IP67 |
| No. of cable outlets | 1 |
| Overvoltage category | III |
| Signal type/category | Power |
| Standard designation | M12 connector |
| Assembly instructions | Tightening limitation |
| Conductor cross section | 2.5 mm² |
| Contact connection type | Pin |
| Contact carrier material | PA |
| Contact surface material | Au |
| Material wire insulation | PE-X |
| Standards/specifications | IEC 61076-2-111 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Ambient temperature (operation) | -40 °C ... 85 °C (without mechanical actuation) |
| Flammability rating according to UL 94 | V0 |
Product Description
Device connector, rear mounting, Power, 4-position, Pin,straight, M12, coding: L, on free cable end, Rear mounting, M16 x 1.5, Individual wires, cable length: 1.5 m,2.50 mm2,PEX litz wire,Item is lead
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
