In Stock Hot Product
SACC-DSI-M12FSS-4CON-M16/2,0PE
SACC-DSI-M12FSS-4CON-M16/2,0PE 1424721 PHOENIX CONTACT Flush-type connector SACC-DSI-M12FSS-4CON-M16/2,0PE 1..
$0.00USD
4306 in stock
Key Specifications
:• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Note:In line with
Coding:S
Shielded:no
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Note | In line with |
| Coding | S |
| Shielded | no |
| Cable type | UL/cUL stranded hook-up wire |
| Head design | Socket |
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Sensor type | Power |
| Thread type | M12 |
| Cable length | 2 m |
| Halogen-free | yes |
| Product type | Circular connectors (device side) |
| Test voltage | 6 kV |
| Assembly note | With flat nut |
| Mounting type | Rear mounting M16 x 1.5 With flat nut |
| Seal material | FKM |
| AWG signal line | 16 |
| Article revision | 07 |
| Contact material | CuZn |
| Flame resistance | in acc. to UL 1581 VW1 |
| Head thread type | M12 |
| Connection method | Individual wires |
| Head cable outlet | straight |
| Tightening torque | 3 Nm ... 4 Nm (M12 connector) |
| Conductor material | Bare Cu litz wires |
| Contact resistance | ≤ 3 mΩ |
| Nominal current IN | 12 A |
| Nominal voltage UN | 630 V |
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Order information: | Lock nut is included in the scope of delivery |
| Single wire, color | black 1, black 2, black 3, green/yellow |
| Cable cross section | 1.31 mm² |
| Degree of pollution | 3 |
| Number of positions | 4 |
| Rated surge voltage | 6 kV AC |
| Degree of protection | IP67 |
| No. of cable outlets | 1 |
| Overvoltage category | III |
| Signal type/category | Power |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| Conductor cross section | 1.31 mm² |
| Contact connection type | Socket |
| Contact carrier material | PA |
| Contact surface material | Au |
| Material wire insulation | mPPE |
| Standards/specifications | based on IEC 61076-2-111 |
| Insertion/withdrawal cycles | > 100 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Wire diameter incl. insulation | 2.2 mm |
| Ambient temperature (operation) | -40 °C ... 105 °C (cable, fixed installation) |
| Flammability rating according to UL 94 | V0 |
| Rated voltage in acc. with IEC 61076-2-101 | 630 V |
Product Description
Conect. plug. to be apar. Wall Poster., Power, 4-Pole, Connecting Female, M12, S - Power, Rear Mount, M16 x 1.5, Single Stranded Wires, UL/cUL Switching Twisted Wire, RoHS II Alternative Product Witho
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
