

| Parameter | Value |
|---|---|
| Coding | A |
| General | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Shielded | no |
| Head design | Socket |
| Thread type | M12 |
| Product type | Circular connectors (device side) |
| Mounting type | Rear mounting M16 x 1.5 With flat nut, tightening limitation |
| Seal material | FKM |
| Contact material | CuZn |
| Head thread type | M12 |
| Head cable outlet | straight |
| Head locking type | Standard |
| Contact resistance | ≤ 3 mΩ |
| No. of cable outlets | 1 |
| Assembly instructions | With flat nut, tightening limitation |
| Insulation resistance | ≥ 100 MΩ |
| Contact carrier material | PA 6.6 |
| Contact surface material | Au |
| Insertion/withdrawal cycles | > 100 |
| Material for screw connection | Zinc die-cast, nickel-plated |
Technical specifications and performance data
Installation and operation guide